topic Wireless Firewall & traffic shaping question in Wireless

Wireless Firewall & traffic shaping question

db3772 — Mon, 08 Jul 2024 11:23:45 GMT

I looked through the documentation but couldn't see if adding multiple destinations under the wireless > Firewall & traffic shaping is possible. The entry box will let me enter them on individual lines but I'm not sure if this is the proper way to do it besides adding multiple rules for each IP address/subnet I want to block specific access to.

Re: Wireless Firewall & traffic shaping question

aleabrahao — Mon, 08 Jul 2024 12:09:48 GMT

It is not possible to add multiple destinations to the same rule.

Re: Wireless Firewall & traffic shaping question

Philip D'Ath — Mon, 08 Jul 2024 12:22:51 GMT

Like this? Keep clicking "Add".

Re: Wireless Firewall & traffic shaping question

db3772 — Mon, 08 Jul 2024 12:27:47 GMT

Not quite, the specific setting I'm looking at is under a wireless firewall and traffic shaping for rules when connected to a SSID

Re: Wireless Firewall & traffic shaping question

Philip D'Ath — Mon, 08 Jul 2024 19:53:42 GMT

Doh. For some reason, I thought you meant traffic shaping rules.

Re: Wireless Firewall & traffic shaping question

IvanJukic — Tue, 09 Jul 2024 04:27:23 GMT

Hi @db3772 ,

If your goal is to block IP/Subnets, there are a few ways this can be achieved. This does depend on your design though. E.g. Enabling a Group Policy to block traffic is a great way.

https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/MR_Firewall_Rules