topic Individual AP upgrade in Wireless

Individual AP upgrade

Noah014 — Wed, 02 Sep 2020 21:39:21 GMT

Hi everyone! Is it possible to, individually, upgrade an AP? I mean, select the network and then select each AP I want to upgrade?

Thanks 🙂

Re: Individual AP upgrade

MerakiGnome — Wed, 02 Sep 2020 21:51:05 GMT

Hi @Noah014

In the meraki dashboard, if you go to the access point in question under "wireless" and scroll to the bottom of the access point page, you can select to update that single AP's firmware.

Re: Individual AP upgrade

MerakiGnome — Wed, 02 Sep 2020 21:58:43 GMT

Hmmm, ignore that! You could once do that.

what about creating a new Network, move an AP into it and upgrade the firmware from there?

Re: Individual AP upgrade

omotesando — Thu, 03 Sep 2020 01:13:20 GMT

Hi, Meraki has a specific firmware version for each network.

It is not possible to fix the version of the firmware for each device.

Re: Individual AP upgrade

Denigl1 — Thu, 03 Sep 2020 06:10:17 GMT

Hi everyone,

Can't you just go to Organization's Tab and select "Firmware Upgrades --> All networks tab" and then select the relevant devices you want to upgrade ?

All my devices are up to date so i can't test it right now but at least i am able to select them one at a time and schedule an upgrade for each of the selected devices.

Maybe give it a try 🙂

Kind Regards

Niklas

Re: Individual AP upgrade

ww^ — Thu, 03 Sep 2020 06:30:22 GMT

@Denigl1 i only see networks in that list.

Re: Individual AP upgrade

Denigl1 — Thu, 03 Sep 2020 06:33:31 GMT

Oh i see, you're right. My mistake, sorry 😞

Re: Individual AP upgrade

Philip D'Ath — Thu, 03 Sep 2020 07:31:25 GMT

As @omotesando has said, you can only upgrade whole networks, not an individual AP.

If you want to do a test, clone the network, move the AP into it, and then upgrade that network.

Re: Individual AP upgrade

Noah014 — Thu, 03 Sep 2020 16:44:01 GMT

Thanks everyone :). I'll do a network and just move the AP i want to upgrade