topic MSE not showing Clients on PI maps (PI 3.1, vMSE 8.0.140 & WLC 8.3.133) in Wireless

MSE not showing Clients on PI maps (PI 3.1, vMSE 8.0.140 & WLC 8.3.133)

David Ritter — Mon, 05 Jul 2021 15:43:27 GMT

While the MSE reports 4967 active clients, none are displayed on PI maps. Only rogue's and interferers.

Client Filter is set for Show All and MSE does display Probing clients but not the attached and authenticated. Left Click the AP and they report plenty of clients attached.

"Show MSE data" is set for Currently Detected.

Re: MSE not showing Clients on PI maps (PI 3.1, vMSE 8.0.140 & WLC 8.3.133)

iamnothere123 — Sat, 09 Jun 2018 02:31:59 GMT

I suggest upgrading to PI 3.3 if possible!

https://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure/products-installation-guides-list.html

Re: MSE not showing Clients on PI maps (PI 3.1, vMSE 8.0.140 & WLC 8.3.133)

David Ritter — Mon, 06 Aug 2018 16:23:53 GMT

that will in fact happen. The 'wired' team is in command and they are not ready yet.

Re: MSE not showing Clients on PI maps (PI 3.1, vMSE 8.0.140 & WLC 8.3.133)

iamnothere123 — Mon, 06 Aug 2018 23:43:14 GMT

I understand!!