topic Re: Wireless SSID Templates in Wireless

Wireless SSID Templates

Georg.Hackl — Fri, 18 Jul 2025 06:17:37 GMT

Hi,

to streamline my Wireless Infrastructure i'm contemplating using templates to deploy my Wireless SSID's.

Is there any best practice recommendation on how to do it in an existing environment?

Re: Wireless SSID Templates

aleabrahao — Fri, 18 Jul 2025 08:47:37 GMT

Take a look at this.

https://documentation.meraki.com/General_Administration/Templates_and_Config_Sync/Managing_Multiple_Networks_with_Configuration_Templates

Re: Wireless SSID Templates

Brash — Tue, 22 Jul 2025 02:46:38 GMT

Templates are great for very standardized cookie-cutter networks.

For existing networks, you need to be aware of what configuration will be overwritten in the network when you bind your network to the template. It will almost certainly require some downtime to reconfigure some specifics (Eg. VLAN's, IP's, Site-to-site VPN settings). If you are uncertain, you can always create a new test network and bind it to the template to see what is impacted.

However, if your networks have a current or future requirement to differ from one another, I instead suggest keeping them separate and using the API to push bulk updates to multiple networks.

It has a slightly higher learning curve but is much more useful/powerful.

Re: Wireless SSID Templates

Georg.Hackl — Fri, 25 Jul 2025 05:22:10 GMT

Thanks for the valuable information!
I will deploy the templates on future networks, which should be quite helpful.

Existing networks - could be quite interesting....