topic Re: Cisco Prime NCS fail webpage in Wireless

Cisco Prime NCS fail webpage

johan oosterwaal — Sun, 04 Jul 2021 04:44:09 GMT

Hello everyone

im new here. but i have a question. its about the Cisco Prime ncs.

i have installed the Cisco Prime with a ova file on a VM-ware server.

i have configured the cisco prime with the setup at the beginning. but the problem is that i can't get the

webpage to work. when i go to the https://ip-address. when i try to login with my admin user at the webpage

it say's that it is a invalid username and password.

wat must i do to be able to login to the webpage. is there like a different user for this..?

thank.

Cisco Prime NCS fail webpage

Eduardo Aliaga — Thu, 08 Mar 2012 00:38:53 GMT

You should try Firefox

"Supported Browsers

The NCS user interface requires Mozilla Firefox 3.6 or later and Internet Explorer 8.0 or later with the Chrome plugin releases or Google Chrome 12.0.742.x. Internet Explorer 6.0 is not supported. The client running the browser must have a minimum of 1 GB of RAM and a 2-GHz processor. The client device should not be running any CPU or memory-intensive applications. "

Please rate if it helps. Kind regards

Cisco Prime NCS fail webpage

johan oosterwaal — Thu, 08 Mar 2012 09:36:26 GMT

thanks for the replay..

I have used firefox , google chroom and internet explorer with the latest versions.

my device has got

Intel(R) core(TM) i5 CPU

4GB (3.43 usable)

32-bit operating system

Windows 7

and stil it's giving my , that the username and password is invalid.

i know that for like the Cisco ACS there is a differnt user to log in to the webpage

could this be the case with the Cisco Prime NCS

Re: Cisco Prime NCS fail webpage

Scott Fella — Thu, 08 Mar 2012 12:54:30 GMT

When you installed NCS, did you wait for the setup to complete? I know that the NCS restarts the service and then the wizard continues for you to enter the username and password.

Sent from Cisco Technical Support iPhone App

Re: Cisco Prime NCS fail webpage

johan oosterwaal — Thu, 08 Mar 2012 15:31:47 GMT

yes i waited for the installion to compleet.

And at the login i used the setup, to run the configuration for the admin user and ip address of the Cisco Prime

Sent from Cisco Technical Support iPhone App

Re: Cisco Prime NCS fail webpage

David Rosener — Thu, 08 Mar 2012 15:57:22 GMT

Are you using "root" as the user account to log in to the webpage? I know that during the NCS initial setup, it asks you for a user account and password, but that is only for logging into the CLI. The root account is used for the web interface.

Re: Cisco Prime NCS fail webpage

johan oosterwaal — Thu, 08 Mar 2012 20:08:07 GMT

No im not using the root account.

I am using the cli user to log in to the webpage.

Is there a default root account for the webpage.. Or do i need to make one..?

Sent from Cisco Technical Support iPhone App

Cisco Prime NCS fail webpage

David Rosener — Thu, 08 Mar 2012 20:19:40 GMT

From the cli, you can configure the root password by using the following command:

ncs password root [password]

Give that a shot, then try to login to the web interface with the root account.

Re: Cisco Prime NCS fail webpage

Eduardo Aliaga — Thu, 08 Mar 2012 20:19:41 GMT

Actually you should have defined the root password for the web interface during setup. Please review the netxt link

http://www.cisco.com/en/US/docs/wireless/ncs/1.1/release/notes/NCS_RN1.1.html#wp169707

Please rate if it helps.

Cisco Prime NCS fail webpage

johan oosterwaal — Wed, 14 Mar 2012 08:37:18 GMT

everyone thanks for your information it help me allot.

but i have fix the problem, apperatly i was using the wrong ova file

now i have downloaded the NCS-VA-1.1.0.58.ova and this is working

i was using the NCS-WAN-VA-1.1.0.1114-small.ova but it has a bug i it

don't know wat or why but this one didn't work

Re: Cisco Prime NCS fail webpage

kmong — Fri, 22 Mar 2013 07:12:18 GMT

We're experiencing the same problem. But are you sure of the way that you resolved the issue?

We have both NCS and NCS (WAN) 1.1.

NCS-VA-1.1.0.58.ova is the installer for NCS

NCS-WAN-VA-1.1.0.1114-small.ova is the installer for NCS WAN 1.1

We cannot logon to the NCS WAN using the root login/password. I have already tried configuring again the root password but error occurs.Until now we cannot logon to NCS WAN.

Any recommendations on this?

Re: Cisco Prime NCS fail webpage

sahseth — Thu, 04 Apr 2013 13:39:40 GMT

As per my findings Username will be Root to access from CLI and Admin will be used from CLI as username.

Thanks.