topic Re: (MX64W-HW) How do I access the functionality displayed in the below part of the attached image? in Wireless

(MX64W-HW) How do I access the functionality displayed in the below part of the attached image?

jonathan.maxwell — Mon, 02 May 2022 15:02:28 GMT

Hello.

(Please see attached screenshot.) device= MX64W-HW , IOS 16.16

I need to enable SSID broadcasting, yet when I navigate to "Wireless settings" I have very few options.

How do I access the functionality displayed in the below part of the attached image?

Thank you!

Re: (MX64W-HW) How do I access the functionality displayed in the below part of the attached image?

Ryan_Miles — Mon, 02 May 2022 15:10:05 GMT

The second image is when you use standalone Meraki APs. That's different than the wireless settings & capabilities in the MX-W.

Re: (MX64W-HW) How do I access the functionality displayed in the below part of the attached image?

Brash — Mon, 02 May 2022 15:40:26 GMT

As @Ryan_Miles said, you're looking under "wireless" which is configuration for standalone AP's.

Configuration for the wireless functionality built into the MX device is under Security & SD-WAN/Teleworker Gateway > Configure > Wireless settings

https://documentation.meraki.com/MX/Wireless/MX_and_Z-Series_Wireless_Settings