topic Re: Reset ssid configuration in Wireless

Reset ssid configuration

r2kat — Wed, 01 Apr 2026 11:35:58 GMT

I just figured out that there is a new modern version of the ssid configuration site at Meraki.
But i still couldnt figure out how to reset an already configured SSID to the default settings or is this still not possible?
This would really helps to keep the environment clean and to have a better overview.
But i also dont want to reset manually each ssid i configured in all the different networks.
Or is there any other possibility to do this?
Best regards
René

Re: Reset ssid configuration

Mark Elsen — Wed, 01 Apr 2026 11:41:16 GMT

- @r2kat Review this thread : https://community.cisco.com/t5/wireless/ssid-reset-to-default/m-p/5472964

Re: Reset ssid configuration

aleabrahao — Wed, 01 Apr 2026 11:59:28 GMT

An SSID cannot be deleted, only disabled, renamed, or reconfigured. Once an SSID has been customized, there’s no native way to wipe all settings in one action.

Re: Reset ssid configuration

joey.debra — Wed, 01 Apr 2026 12:18:50 GMT

I usually just put Unconfigured SSID # back and set it to disabled.
That is all that is needed to remove it from view if you have more than 5 or just don't let your eyes fall on it.

Re: Reset ssid configuration

Philip D'Ath — Wed, 01 Apr 2026 12:57:16 GMT

There is no way to reset an SSID to its defaults. It would be nice to have this option.

Re: Reset ssid configuration

r2kat — Wed, 01 Apr 2026 13:36:35 GMT

Thank you all for the feedback.
Then its still the same like last year.
I just hope that they will add a simple 'default' button when they have already modified the view..
The main problem is still that the chance of a mis-configuration with a completely modified ssid is much higher, then reset it to default and then build it up by scratch.
I will send them a feature request.
BR