https://community.cisco.com/t5/wireless/eapol-timeouts/m-p/5553415#M313366 <P>In your place, I would try two things: first, update the client's Wi-Fi card driver, and second, disable FT.</P><P>Although FT has its advantages, it still presents some challenges regarding devices that often don't have full support for 802.11r.</P> Mon, 18 May 2026 16:05:24 GMT aleabrahao 2026-05-18T16:05:24Z https://community.cisco.com/t5/wireless/eapol-timeouts/m-p/5553414#M313365 <P>Suffering from a persistent issue here.</P><P>CW9176I / ISE / .1x Auth / MR32.2.3</P><P>We are suffering from persistent EAPOL timeouts - disconnecting our clients from the network either fully or momentarily. Not many (6 today) but enough to cause the management to be unhappy.</P><P>Gone through all the settings, adjusted timers, upgraded to 32.2.3, turned on fast roaming, ISE timers. The whole lot, but we are still seeing issues. 6 today in a fairly quiet office day. These three reasons seen for todays failures.</P><P><SPAN>reason='eapol_timeout'<BR /></SPAN><SPAN>reason='eapol_timeout' reassoc='1'<BR />reason='eapol_timeout' reassoc='1' roam_ap=</SPAN></P><P>Anyone has any experience of this?</P> Mon, 18 May 2026 15:55:07 GMT https://community.cisco.com/t5/wireless/eapol-timeouts/m-p/5553414#M313365 StarBlink 2026-05-18T15:55:07Z https://community.cisco.com/t5/wireless/eapol-timeouts/m-p/5553415#M313366 <P>In your place, I would try two things: first, update the client's Wi-Fi card driver, and second, disable FT.</P><P>Although FT has its advantages, it still presents some challenges regarding devices that often don't have full support for 802.11r.</P> Mon, 18 May 2026 16:05:24 GMT https://community.cisco.com/t5/wireless/eapol-timeouts/m-p/5553415#M313366 aleabrahao 2026-05-18T16:05:24Z