topic Re: Problems connecting clients in Wireless https://community.cisco.com/t5/wireless/problems-connecting-clients/m-p/1081316#M32218 <HTML><HEAD></HEAD><BODY><P>Make sure on the Vista clients that is is indeed WPA and tkip configured and not WPA with AES. Also verify that PEAP and not smart card is configured.</P><P></P><P>DO you get an error on your radius server since you are using PEAP or on your WLC?</P></BODY></HTML> Thu, 14 Aug 2008 12:53:02 GMT Scott Fella 2008-08-14T12:53:02Z Problems connecting clients https://community.cisco.com/t5/wireless/problems-connecting-clients/m-p/1081315#M32217 <P>Hello, </P><P>I have two controllers Cisco 4402 with Software Version 3.2.171.6. </P><P>The network have authentication WPA, data encryption TKIP and PEAP authentication. </P><P></P><P>With Windows XP customers I have no problem, but customers with Windows Vista gives an error message like that could see attached: "network settings saved in this PC does not match the requirements of the network"</P><P> </P><P>What may be happening? </P><P>Thank you</P> Sat, 03 Jul 2021 23:19:27 GMT https://community.cisco.com/t5/wireless/problems-connecting-clients/m-p/1081315#M32217 slandeira 2021-07-03T23:19:27Z Re: Problems connecting clients https://community.cisco.com/t5/wireless/problems-connecting-clients/m-p/1081316#M32218 <HTML><HEAD></HEAD><BODY><P>Make sure on the Vista clients that is is indeed WPA and tkip configured and not WPA with AES. Also verify that PEAP and not smart card is configured.</P><P></P><P>DO you get an error on your radius server since you are using PEAP or on your WLC?</P></BODY></HTML> Thu, 14 Aug 2008 12:53:02 GMT https://community.cisco.com/t5/wireless/problems-connecting-clients/m-p/1081316#M32218 Scott Fella 2008-08-14T12:53:02Z