topic Cisco WISM Clustering Problem... in Wireless https://community.cisco.com/t5/wireless/cisco-wism-clustering-problem/m-p/1288882#M32352 <P>Hi,</P><P>I am Cisco WiSM consists of two Cisco 4404 controllers which is installed on the 6503 Switch. I am using Mac Address based authentication for clients to get connect.</P><P>When i am adding a new client's mac address to one controller, it is not reflecting to the Controller B. I have to manually make the entry in Controller B also.</P><P></P><P>Is this a problem related to Mobility Group configuration??</P><P></P><P></P> Sun, 04 Jul 2021 01:11:14 GMT sujithr 2021-07-04T01:11:14Z Cisco WISM Clustering Problem... https://community.cisco.com/t5/wireless/cisco-wism-clustering-problem/m-p/1288882#M32352 <P>Hi,</P><P>I am Cisco WiSM consists of two Cisco 4404 controllers which is installed on the 6503 Switch. I am using Mac Address based authentication for clients to get connect.</P><P>When i am adding a new client's mac address to one controller, it is not reflecting to the Controller B. I have to manually make the entry in Controller B also.</P><P></P><P>Is this a problem related to Mobility Group configuration??</P><P></P><P></P> Sun, 04 Jul 2021 01:11:14 GMT https://community.cisco.com/t5/wireless/cisco-wism-clustering-problem/m-p/1288882#M32352 sujithr 2021-07-04T01:11:14Z Re: Cisco WISM Clustering Problem... https://community.cisco.com/t5/wireless/cisco-wism-clustering-problem/m-p/1288883#M32353 <HTML><HEAD></HEAD><BODY><P>To export the Mac filters from one controller to another, create a template using WCS and push it out to both controllers. Otherwise, you'd just have to refer to the mac-address list on one while implementing it on the other.</P><P></P></BODY></HTML> Thu, 29 Oct 2009 14:31:42 GMT https://community.cisco.com/t5/wireless/cisco-wism-clustering-problem/m-p/1288883#M32353 a-vazquez 2009-10-29T14:31:42Z