topic Re: WiSM installation problems in Wireless https://community.cisco.com/t5/wireless/wism-installation-problems/m-p/1245942#M32369 <HTML><HEAD></HEAD><BODY><P>have you enabled dhcp on the 6509?</P><P>service dhcp</P><P>Session slot 9 pro 1 will not be possible until you can assign it an ip address</P></BODY></HTML> Thu, 16 Jul 2009 12:02:59 GMT ericgarnel 2009-07-16T12:02:59Z WiSM installation problems https://community.cisco.com/t5/wireless/wism-installation-problems/m-p/1245941#M32367 <P>I'm trying to install the WiSM in a 6509-E switch. There will be no connection between Sup720-3B and WisM. The Service Port is not getting ip address bij DHCP scope on 6509 switch.</P><P></P><P>wism service-vlan 51</P><P>wism module 8 controller 1 allowed-vlan 50,51,64,66,68,70,72,74,76,78,80,82,84</P><P>wism module 8 controller 1 allowed-vlan 86,88,90,92,94,96,98,100,102,128,130</P><P>wism module 8 controller 1 allowed-vlan 132,144</P><P>wism module 8 controller 2 allowed-vlan 50,51,64,66,68,70,72,74,76,78,80,82,84</P><P>wism module 8 controller 2 allowed-vlan 86,88,90,92,94,96,98,100,102,128,130</P><P>wism module 8 controller 2 allowed-vlan 132,144</P><P>wism module 8 controller 1 native-vlan 51</P><P></P><P>I configured a layer 2 and layer 3 VLAN 51 and assigned ip address to the SVI..</P><P></P><P>Service Vlan : 51, Service IP Subnet : 10.200.51.1/255.255.255.248</P><P> WLAN</P><P>Slot Controller Service IP Management IP SW Version Status</P><P>----+-----------+----------------+----------------+-----------+---------------</P><P>8 1 0.0.0.0 0.0.0.0 Service Port Up</P><P>8 2 0.0.0.0 0.0.0.0 Service Port Up</P><P></P><P>Also Session slot 8 pro 1 is not possible..</P><P></P><P>What can be wrong ?</P><P></P><P>Regards</P><P>Remco</P> Sun, 04 Jul 2021 00:49:55 GMT https://community.cisco.com/t5/wireless/wism-installation-problems/m-p/1245941#M32367 remco.gussen 2021-07-04T00:49:55Z Re: WiSM installation problems https://community.cisco.com/t5/wireless/wism-installation-problems/m-p/1245942#M32369 <HTML><HEAD></HEAD><BODY><P>have you enabled dhcp on the 6509?</P><P>service dhcp</P><P>Session slot 9 pro 1 will not be possible until you can assign it an ip address</P></BODY></HTML> Thu, 16 Jul 2009 12:02:59 GMT https://community.cisco.com/t5/wireless/wism-installation-problems/m-p/1245942#M32369 ericgarnel 2009-07-16T12:02:59Z Re: WiSM installation problems https://community.cisco.com/t5/wireless/wism-installation-problems/m-p/1245943#M32371 <HTML><HEAD></HEAD><BODY><P>Service DHCP is enabled (by default)...</P><P></P><P></P></BODY></HTML> Thu, 16 Jul 2009 12:06:39 GMT https://community.cisco.com/t5/wireless/wism-installation-problems/m-p/1245943#M32371 remco.gussen 2009-07-16T12:06:39Z