topic Re: Cisco WiSM Question in Wireless

Cisco WiSM Question

Jae_Robinson — Sat, 03 Jul 2021 23:19:51 GMT

Using a Cisco WiSM Controller w/ version 4.1.181.0 to monitor/manage Rogues and Ad Hocs.

Wanting to dump the results into a database for management history -

If I use SNMP to retrieve the data - which MIB do I use...

Looking to get the table/results with

MAC address

SSID

Detecting Radios

what trap object ID do I use/set to capture?

is it possible to use a webget or wget to accomplish this as well?

Re: Cisco WiSM Question

didyap — Thu, 21 Aug 2008 16:58:07 GMT

Here is information about two OIDs which may help you :

Object ciscoLwappWlanMIB

OID 1.3.6.1.4.1.9.9.512

Object ciscoLwappApMIB

OID 1.3.6.1.4.1.9.9.513

Both OIDs belongs to the CISCO-LWAPP-AP-MIB.

Re: Cisco WiSM Question

Jae_Robinson — Thu, 21 Aug 2008 17:39:01 GMT

Awesome!

Thanks - I believe that I am going to have to try and use an ssh solution to connect and get the table information on the Ad Hoc Rouge networks.

Sure with there was an easy way to deal with this as they are trying to set this up without having to provide an SNMP connection for those that are going to manage that data.

Thanks for the info.