topic Hello Experts, in Wireless

Multiple sites using the same SSID but different WLANS

skelley5000 — Sun, 04 Jul 2021 05:43:27 GMT

when I try to enable a WLAN that is using the same SSID as another WLAN I get this message

The following errors occurred while updating the WLAN:

WLAN with duplicate SSID and L2 security policy found.

each location has its own interface because each site is setup on our 6509 with a different VLAN. What is the best way to work around this.

Re: Multiple sites using the same SSID but different WLANS

Scott Fella — Wed, 26 Sep 2012 13:20:45 GMT

What you are trying to do will not work as you can see. The best way is to define your dynamic interfaces if traffic will come back to the WLC and create ap groups. This will allow you to specify APs to have a particular SSID and you define what interface you want the traffic to egress. If you plan on putting traffic local to the site of the access points, then you will need to look into FlexConnect.

Sent from Cisco Technical Support iPhone App

Multiple sites using the same SSID but different WLANS

skelley5000 — Wed, 26 Sep 2012 13:26:58 GMT

We will be using HREAP, but all traffic comes back the main site, so there is no reason for the sites to have local switching. I have AP groups setup for each site and each interface is a dynamic interface.

Multiple sites using the same SSID but different WLANS

George Stefanick — Wed, 26 Sep 2012 14:42:37 GMT

Hummmm... Why are you using HREAP if you are brining back all the traffic ?

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

Multiple sites using the same SSID but different WLANS

skelley5000 — Wed, 26 Sep 2012 15:10:44 GMT

Because we only have a T1 between the sites and being health care provider we have to make sure the traffic is secure in between the sites.

Multiple sites using the same SSID but different WLANS

George Stefanick — Wed, 26 Sep 2012 15:16:03 GMT

So break down HREAP. Just do AP grooups like Scott mentioned .

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

Re: Multiple sites using the same SSID but different WLANS

skelley5000 — Wed, 26 Sep 2012 17:39:57 GMT

That goes back too, I have 2 WLAN's, different interfaces because of the VLAN's are different but same SSID. I can't have the SSID enabled on both WLAN's? So how will having AP goups help me if I can't enable the SSID?

Multiple sites using the same SSID but different WLANS

George Stefanick — Wed, 26 Sep 2012 17:43:45 GMT

Maybe I am missing something ...

You have the same SSIDs but you are mapping them to different VLANs . This is purpose of AP groups. Check this link http://www.my80211.com/cisco-wlc-labs/2009/3/22/cisco-ap-group-nugget.html

Its a video I posted on my blog about ap groups ..

HREAP is used to dump traffic local. You arent looking to do that. You want to bring the traffic back and still have subnets only for that office. Yes ? Then AP groups..

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

Re: Multiple sites using the same SSID but different WLANS

Scott Fella — Wed, 26 Sep 2012 18:02:44 GMT

That a look at what George posted. You have to understand that you only need to create the one SSID. Te interface you specify in the WLAN gets override by what interface you define in your AP Group.

To make its easy:

SSID: secure

AP Group: Site 1

SSID: secure

Interface: vlan x

AP Group: Site 2

SSID: secure

Interface: vlan y

AP Group: Site 3

SSID: secure

Interface: vlan z

Sent from Cisco Technical Support iPhone App

Re: Multiple sites using the same SSID but different WLANS

skelley5000 — Wed, 26 Sep 2012 18:22:40 GMT

I see, Sorry I understand better when seeing then I do reading.... Thanks guys for the help

Re: Multiple sites using the same SSID but different WLANS

Yahya Jaber — Thu, 11 Oct 2012 19:26:10 GMT

Hi,

try this also.

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_wlan.html#wp1645980

Hi Scott,I have this request

Florin Barhala — Tue, 17 Jun 2014 09:54:54 GMT

Hi Scott,

I have this request where I have to advertise the same SSID on both local-mode APs and FlexConnect APs.

For this reason I have to create two SSIDs, same name, same authentication (802.1x). Any tips for this scenario?

Hello Experts,

pankaj.bandewar — Tue, 23 Aug 2016 09:04:15 GMT

Hello Experts,

Can anyone help me in doing this.

Kindly share step by step procedure how to achieve this..

i have 5508 Controller in HA with 8.0.115.0 release.

Re: Hi Scott,I have this request

Sandesh Chavan — Thu, 25 Jan 2018 09:54:09 GMT

Hi Florin,

How did you implemented this?