topic Re: stoping SSID broadcast in Wireless

stoping SSID broadcast

bapatsubodh — Sun, 04 Jul 2021 01:20:07 GMT

hi,

If we have two SSID configured on 1100 series Access Point is it possible to stop or hide broadcast of one SSID by "no guest-mode" command and allow broadcast of other SSID with guest-mode command?

Please share the experience.

Thanks

Subodh

Re: stoping SSID broadcast

dancampb — Tue, 08 Dec 2009 16:12:52 GMT

Guest-mode can only be configured on one SSID. If you wanted to broadcast multiple SSID's you would then need to use mbssid guest-mode. With using only the guest-mode config only one SSID would be broadcast in the beacons. The other SSID would not be broadcast in the beacons and would be seen when the client sends a probe request for that SSID.

Re: stoping SSID broadcast

bapatsubodh — Tue, 08 Dec 2009 18:12:29 GMT

Hi Dancampb,

Thanks for your repaly. In fact we have only two SSID configured and we need to hide one for them.

so the SSID which we need to hide will be configured as "no guest-mode" and other will be broadcasted by default.

Subodh