topic show net user summary output in Wireless

show net user summary output

neil_cco_2094 — Sun, 04 Jul 2021 06:09:12 GMT

Hi All

I have a 5508 WLC running on 7.0.116, I need to be able to pull all configured users off the WLC and import into excel, I have 900 odd users configured. When I run a show net user summary it only displays a third of users.

I'm hitting space to tab through each page, then eventually I just get dumped back to the command prompt. Any ideas?

Re: show net user summary output

Scott Fella — Mon, 03 Dec 2012 12:18:30 GMT

Try to issue a config paging disable prior to running your command.

Sent from Cisco Technical Support iPhone App

Re: show net user summary output

neil_cco_2094 — Mon, 03 Dec 2012 13:31:00 GMT

Hi Scott,

Thanks for the reply, I gave that a shot, it still is only outputting the names up to around 230 mark. Bug?

show net user summary output

Saravanan Lakshmanan — Mon, 03 Dec 2012 19:32:31 GMT

Hi Neil

Sure you're hitting a bug there.

WLC>show run-config commands or pull the config from wlc and export the net users to excel.

Thanks

show net user summary output

Saravanan Lakshmanan — Fri, 07 Dec 2012 20:49:48 GMT

you're hitting an internal bug that is getting fixed in future release, you need to open TAC case if you need more info about this bug.

show net user summary output

Saravanan Lakshmanan — Thu, 13 Dec 2012 07:14:49 GMT

this bug is fixed on 7.2.103.0.