https://community.cisco.com/t5/wireless/mac-filter-fields/m-p/2984600#M33769 <P>I have setup MAC Filtering and everything is working great. From what I can see, MAC Filtering will only work for a WLAN that is configured for MAC Filtering and if the&nbsp;Profile Name field is set to that SSID or All WLANs. Also from what I'm seeing, the Interface and IP address fields make no difference when I modify them.&nbsp;I configured&nbsp;a device to be set to a different interface and the device never pulled an IP address from that interface, instead it just pull an IP from interface that the WLAN was configured for. What do I use the Interface and IP address fields for? I've tried a few different scenarios and they all seemed to come to the same result.</P> Mon, 05 Jul 2021 13:02:33 GMT Dan Brandt 2021-07-05T13:02:33Z https://community.cisco.com/t5/wireless/mac-filter-fields/m-p/2984600#M33769 <P>I have setup MAC Filtering and everything is working great. From what I can see, MAC Filtering will only work for a WLAN that is configured for MAC Filtering and if the&nbsp;Profile Name field is set to that SSID or All WLANs. Also from what I'm seeing, the Interface and IP address fields make no difference when I modify them.&nbsp;I configured&nbsp;a device to be set to a different interface and the device never pulled an IP address from that interface, instead it just pull an IP from interface that the WLAN was configured for. What do I use the Interface and IP address fields for? I've tried a few different scenarios and they all seemed to come to the same result.</P> Mon, 05 Jul 2021 13:02:33 GMT https://community.cisco.com/t5/wireless/mac-filter-fields/m-p/2984600#M33769 Dan Brandt 2021-07-05T13:02:33Z