topic Increasing VMWare Disk Space For NCS Upgrade in Wireless

Increasing VMWare Disk Space For NCS Upgrade

Dan Man — Mon, 05 Jul 2021 06:54:50 GMT

I'm trying to upgrade our NCS infrastructure from 1.3 to 2.0. I received an error during the upgrade that I needed to increase the number of CPU's, RAM, and disk. I was able to add the additional CPU, RAM, and disk. Going through the upgrade again, the only error I receive is about adding space to the /opt directory. I have over 300GB of memory free, after adding the additional space, so this should satisfy the requirement. When logging into the NCS ADE-OS, I do a sh disks and see that the OS has not recognized the additional space. With the backend OS being a Cisco Linux version, is there a command I have to run to get the OS to recognize the additional space? Any help would be appreciated. Thanks!

Increasing VMWare Disk Space For NCS Upgrade

Stephen Rodriguez — Wed, 08 Jan 2014 04:53:01 GMT

Take a look at this document that Rollin put together.

https://supportforums.cisco.com/docs/DOC-35173

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Increasing VMWare Disk Space For NCS Upgrade

Sandeep Choudhary — Wed, 08 Jan 2014 07:20:52 GMT

one more way to do:

Increasing diskspace on Cisco Prime Infrastructure NCS 1.2 "the hard way?

http://blog.42.be/2013/01/increasing-diskspace-on-cisco-prime.html

also check this one:

https://supportforums.cisco.com/docs/DOC-26960

Regards