topic NCS-1.0.2 java exception in Wireless

NCS-1.0.2 java exception

hlehmann — Sun, 04 Jul 2021 04:43:03 GMT

Hallo,
I cannot run (fresh installed) NCS on ESXi.
Testhost has 8GB phys. RAM.

Whats going wrong?

regards Heiko

NCS-VA-1.0.2.29-small.ova

wcs/admin# ncs status
Health Monitor is stopped.
Reporting Server is Stopped
Ftp Server is Stopped
Database server is stopped
Tftp Server is Stopped
Matlab Server is Stopped
NMS Server is stopped.

wcs/admin# ncs start

Starting Network Control System...

Exception in thread "main" java.lang.NullPointerException
        at com.cisco.wnbu.udi.impl.UDIManager.isPhysicalAppliance(UDIManager.java:184)
        at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:325)
        at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:279)
        at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:884)

wcs/admin# sh logg application
03/03/12 09:20:26.244 INFO [admin] [main] Starting Network Control System...
03/03/12 09:20:26.244 INFO [admin] [main]
03/03/12 09:20:26.325 ERROR [admin] [main] Problem using CARS API:
com.cisco.cars.fnd.CARSException: CARS_FAILURE : -999 : Failed to get UDI configuration. : Failure occurred during request
        at com.cisco.cars.fnd.CARSException.analyzeReturnCode(CARSException.java:118)
        at com.cisco.cars.serviceEngine.impl.EngineAdminServiceImpl.getUDI(EngineAdminServiceImpl.java:66)
        at com.cisco.wnbu.udi.impl.UDIManager.generateUDI(UDIManager.java:69)
        at com.cisco.wnbu.udi.impl.UDIManager.setVirtualPID(UDIManager.java:169)
        at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:323)
        at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:279)
        at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:884)

wcs/admin# sh mem
total memory:    6849420 kB
free memory:     6585852 kB
cached:           182356 kB
swap-cached:           0 kB

- test ping: ok.
- test nslookup: ok.

NCS-1.0.2 java exception

Scott Fella — Mon, 05 Mar 2012 01:31:25 GMT

I had no issue running it on VMware Workstation 8 nor ESXi 5. I just followed these steps in this doc. I suppose you have tried installing this again?

http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/wst.html#wp1311467

NCS-1.0.2 java exception

raun.williams — Tue, 06 Mar 2012 18:22:53 GMT

Interesting you named your NCS, WCS? Did this start occuring after you imported your WCS config?

NCS-1.0.2 java exception

hlehmann — Wed, 07 Mar 2012 21:05:38 GMT

Yes, i hope so.

heiko

Re: NCS-1.0.2 java exception

hlehmann — Wed, 07 Mar 2012 21:18:59 GMT

Yes, this ist a test-vm.

Before import.

ignore "Correct Answer"-button please. The button was under my mouse....

regards heiko

NCS-1.0.2 java exception

ben.biley — Wed, 30 May 2012 17:14:41 GMT

Hello Heiko,

Were you able to get it to successfully run after initially receiving the exception messages?

Regards,

-Ben

NCS-1.0.2 java exception

hlehmann — Thu, 14 Jun 2012 20:25:40 GMT

Hello ben,

> Were you able to get it to successfully run after initially receiving the exception messages?

no.

see you:

wcs/admin# ncs start

Starting Network Control System...

wcs/admin# ncs status
Health Monitor is stopped.
Reporting Server is Stopped
Ftp Server is Stopped
Database server is stopped
Tftp Server is Stopped
Matlab Server is Stopped
NMS Server is stopped.

Project closed at 01.May.2012

We are waiting for a new version, which is less bitchy.

regards Heiko

NCS-1.0.2 java exception

havenzks — Fri, 13 Jul 2012 14:36:45 GMT

Heiko,

Do you have an solution for Your problem?

We got exact the same issue.

René

NCS-1.0.2 java exception

benell — Thu, 18 Oct 2012 09:34:26 GMT

Hi all,

did anybody found a solution,yet?

Got the some issue.

best regards,

benjamin

NCS-1.0.2 java exception

ben.biley — Thu, 18 Oct 2012 13:34:28 GMT

I had to reinstall onto a VMWare host rather than XenApp and that fixed it. NCS is apparently not compatible. Just make sure you follow the system reqs to the 't'.

-Ben