topic Cisco NCS Help in Wireless

Cisco NCS Help

Jay233 — Sun, 04 Jul 2021 04:32:21 GMT

I currently have two issues with a new NCS install, if any one can help I would be really grateful.

1, I removed a controller then tried to add it back in, I now receive the following error message "Add Device Failed! Device already exists in the current domain".

2, SSH using putty over to the NCS instance (server) gets to a login prompt but when I enter a valid user name it instantly returns "Access Denied"

browser access is fine with several user names and passwords.

A big in advance to any replies!!!

Re: Cisco NCS Help

FFIAdministrator — Wed, 08 Feb 2012 20:45:18 GMT

Maybe there is no configuration for ssh/user in that device, did you try the Cisco account settings?

Normally when you connect via SSH the user can be anything as long as you enter the proper password for The SSH configuration, then you will need to authenticate enable or a user with security level 15.

Also ensure your device is configured to accept SSH

Sent from Cisco Technical Support iPad App

Re: Cisco NCS Help

mike.willing — Wed, 08 Feb 2012 22:44:45 GMT

Check under Configure - Unknown Devices.

Cisco NCS Help

m.gajsek — Fri, 10 Feb 2012 12:12:13 GMT

hi,

you have multiple domains?

The controller must always be cleared in the ROOT domain.

The user for the SSH is "admin" and the root password you've set.

miro.

Cisco NCS Help

Jay233 — Thu, 16 Feb 2012 17:48:56 GMT

Many thanks for the comments, I managed to resolve the issues by upgrading to the latest NCS bundle.tar.

Cheers,

Jay

Cisco NCS Help

andy.winford — Fri, 07 Sep 2012 01:05:45 GMT

MIKE WILLING you are a genius. I've been racking my brain for over two hours on this.

Cisco NCS Help

alicato43 — Sun, 08 Sep 2013 23:16:47 GMT

hi all,

i am receiving the same error message

Add Device Failed! Device already exists in the current domain". even after an upgrade to cisco prime v2.0,

its a8500 controller on 7.4 code, it doesnt exist in controllers unknown devices either.

please adivse

thanks

How do you do to upgrade the

anagui1109 — Wed, 26 Mar 2014 16:34:19 GMT

How do you do to upgrade the lastest version if you can't access using SSH? I have the same problem but i can't access console