topic Re: Trouble with ACS in Wireless https://community.cisco.com/t5/wireless/trouble-with-acs/m-p/48802#M34860 <HTML><HEAD></HEAD><BODY><P>Generally, you&#146;ll want an access point on each floor but one will work with reduced signal strength. The config is pretty straight-forward from the configuration guide and the NICs are available both PCI and PCMCIA. <A class="jive-link-custom" href="http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Hardware:Cisco_Aironet_350&amp;s=Documentation#Product_Documentation" target="_blank">http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Hardware:Cisco_Aironet_350&amp;s=Documentation#Product_Documentation</A> If you are using and ACS to authenticate your wireless users, set that part up after you&#146;ve established wireless connectivity. Usually, WEP encryption is enough unless you must authenticate your users for some reason</P></BODY></HTML> Mon, 19 Nov 2001 14:58:38 GMT bwalchez 2001-11-19T14:58:38Z Trouble with ACS https://community.cisco.com/t5/wireless/trouble-with-acs/m-p/48801#M34859 <P>Hi I'm a student who is trying figure out how to configure Woreless Network to an internetwork. What would be the proper steps to implement such a network in a two floor facility that is 344sq.ft? We have downloaded the ACS from the web and we are using one base station: Aironet 350. Need Help in setting up a NAS? Thank you, any info would be very appreciateive.</P> Mon, 05 Jul 2021 05:52:17 GMT https://community.cisco.com/t5/wireless/trouble-with-acs/m-p/48801#M34859 borysl 2021-07-05T05:52:17Z Re: Trouble with ACS https://community.cisco.com/t5/wireless/trouble-with-acs/m-p/48802#M34860 <HTML><HEAD></HEAD><BODY><P>Generally, you&#146;ll want an access point on each floor but one will work with reduced signal strength. The config is pretty straight-forward from the configuration guide and the NICs are available both PCI and PCMCIA. <A class="jive-link-custom" href="http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Hardware:Cisco_Aironet_350&amp;s=Documentation#Product_Documentation" target="_blank">http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Hardware:Cisco_Aironet_350&amp;s=Documentation#Product_Documentation</A> If you are using and ACS to authenticate your wireless users, set that part up after you&#146;ve established wireless connectivity. Usually, WEP encryption is enough unless you must authenticate your users for some reason</P></BODY></HTML> Mon, 19 Nov 2001 14:58:38 GMT https://community.cisco.com/t5/wireless/trouble-with-acs/m-p/48802#M34860 bwalchez 2001-11-19T14:58:38Z