topic Mobility Groups in Wireless https://community.cisco.com/t5/wireless/mobility-groups/m-p/1812695#M3500 <HTML><HEAD></HEAD><BODY><P>Thanks.</P></BODY></HTML> Fri, 27 Jan 2012 21:21:56 GMT tmeade5622 2012-01-27T21:21:56Z Mobility Groups https://community.cisco.com/t5/wireless/mobility-groups/m-p/1812693#M3498 <P>Can you have controllers on dissimilar versions of code in the same mobility group? </P><P></P><P>For example 3 controllers on 7.0.116.0 and 1 controller on 7.0.220.0.</P> Sun, 04 Jul 2021 04:28:02 GMT https://community.cisco.com/t5/wireless/mobility-groups/m-p/1812693#M3498 tmeade5622 2021-07-04T04:28:02Z Mobility Groups https://community.cisco.com/t5/wireless/mobility-groups/m-p/1812694#M3499 <HTML><HEAD></HEAD><BODY><P>Yes, that should work just fine. But you are best served by having all WLC in the mobility group on the same code.</P><P></P><P>Do keep in mind, that if your APs fail over to a WLC on a different code that they will need to download code and reboot prior to being able to service clients.</P><P></P><P>Steve</P></BODY></HTML> Fri, 27 Jan 2012 20:32:49 GMT https://community.cisco.com/t5/wireless/mobility-groups/m-p/1812694#M3499 Stephen Rodriguez 2012-01-27T20:32:49Z Mobility Groups https://community.cisco.com/t5/wireless/mobility-groups/m-p/1812695#M3500 <HTML><HEAD></HEAD><BODY><P>Thanks.</P></BODY></HTML> Fri, 27 Jan 2012 21:21:56 GMT https://community.cisco.com/t5/wireless/mobility-groups/m-p/1812695#M3500 tmeade5622 2012-01-27T21:21:56Z