topic same prob here... i have 122 in Wireless

splitting a floor heat map in Prime Infrastructure (PI)

ghalbedel — Mon, 05 Jul 2021 12:19:17 GMT

my 1st floor heat map has 118 APs and everytime I add one i get a pop-up telling me more than 100/floor is not recommended.

So what is the best way to split the floor so I have less than 100 APs per map?

Do I create it as a new floor?

Do I have to delete the current map to create 2 new ones.

Is there an easy way to just split the current map and retain the current AP placements on the map?

Any recommendations would be helpful.

Rasika Nayanajith — Thu, 30 Jun 2016 07:08:01 GMT

Did you reach TAC on this ? I think that is the best avenue

what sort of environment is this to have that many AP on a single floor ?

HTH

Rasika

ghalbedel — Thu, 30 Jun 2016 13:19:17 GMT

a high school

Rasika Nayanajith — Thu, 30 Jun 2016 21:00:07 GMT

I would create multiple buildings in Prime & use it as a workaround

HTH

Rasika

wirelessman — Wed, 16 Aug 2017 05:48:52 GMT

same prob here... i have 122 in one floor.

did you find any solution, ghalbedel?

thanks!

ghalbedel — Wed, 16 Aug 2017 11:38:45 GMT

I wound up creating 2 maps splitting the floor up into 2 sections and moving all the APs accordingly.

wirelessman — Thu, 17 Aug 2017 05:58:46 GMT

and in Prime they are still on same level?

ghalbedel — Thu, 17 Aug 2017 11:49:26 GMT

yes

Tobias Heisele — Thu, 25 Jan 2018 11:12:21 GMT

Have anyone tried this with next gen maps (Pi3.2++)?