topic That is what I followed. I in Wireless

Prime Infrastructure upgrade

Eric Lindsey — Mon, 05 Jul 2021 11:18:51 GMT

I am trying to upgrade my Prime Infrastructure from 1.3 to 2.2 but the restore is failing. I pulled a backup of 1.3 and restored it to 1.4. Then I took a backup of 1.4 and I am trying to restore it to 2.2. The restore keeps failing saying that I need to reset the db on 2.2 and try the restore again. I make it to stage 8 of the restore before it fails. Any ideas?

did u follow this post:

Sandeep Choudhary — Fri, 27 Nov 2015 13:41:13 GMT

did u follow this post:

http://mrncciew.com/2014/12/18/how-to-go-there-pi-2-2/

Regards

That is what I followed. I

Eric Lindsey — Fri, 27 Nov 2015 14:26:05 GMT

That is what I followed. I did not move any licenses to my temporary 1.4 prime though

Take a look at this:

Scott Fella — Fri, 27 Nov 2015 17:17:23 GMT

Take a look at this:

If you are currently using one of the following versions of Prime Infrastructure, you can back up your existing data and then restore that data to a different server running Prime Infrastructure 2.2:

Cisco Prime Infrastructure 2.1.2 (with the UBF patch)
Cisco Prime Infrastructure 2.1.1 (with the UBF patch)
Cisco Prime Infrastructure 2.1.0.0.87
Cisco Prime Infrastructure 1.4.2
Cisco Prime Infrastructure 1.4.1
Cisco Prime Infrastructure 1.4.0.45

If you are using a version earlier than 1.4.0.45 or 2.1.0.0.87, you will need to upgrade your server to version 2.1.0.0.87 (or version 1.4.0.45) before taking the backup.

-Scott

I would probably go to PI 3.0

Scott Fella — Fri, 27 Nov 2015 17:19:58 GMT

I would probably go to PI 3.0 also. Standup an new VM instance and perform a backup and restore. License is not node-locked, so as long as you have the old license or SmartNet, you are good to go.

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/quickstart/guide/cpi_qsg.html

-Scott

Refer links : http://www

mohanak — Mon, 30 Nov 2015 11:43:38 GMT

Refer links : http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/release/notes/cpi_rn.html#pgfId-82293

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/quickstart/guide/cpi_qsg.html#pgfId-113783