topic Universal AP priming - Unable to log into AP in Wireless

Universal AP priming - Unable to log into AP

joeczebotar — Mon, 05 Jul 2021 11:11:14 GMT

I'm trying to manually prime a lwapp on a 2504 controller. I have followed the documents on:

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g.html

Controller is on 8.0.115.30 code and everything is setup on the wlan (universal AP admin is checked).

I am using an iPhone 5S with the AirProvision application. I can associate to the SSID from the universal AP, get an IP on the management vlan, reach the internet on the phone and log into the app with my CCO.

Issue I'm having is that the app will not log into the AP. I have tried the default creds and created different creds. Sometimes the app gives messages of 'connecting to AP' - request timed out. Other times when trying to log into the AP, the app displays messages of 'getting AP parameters' - 'timed out', sometimes 'server cannot be reached', and some times of 'not a universal AP'.

It seems that I cannot log into the AP. Unfortunately, I do not have another model phone to test with.

Any thoughts are appreciated.

Thanks,

I have the same issue with

tombaz — Thu, 12 Nov 2015 11:20:47 GMT

I have the same issue with version 8.0.121.0 and I have tried it with a Windows and an Android phone.

2504WLC and 2702i AP

br Tom

errors in Universal AP

mohanak — Fri, 13 Nov 2015 10:23:49 GMT

errors in Universal AP Regulatory Domain Deployment Guide

CSCuw91933

Description

Symptom:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/AP_Regulatory_Domain_DG/b_universal_AP_regulatory_domain_DG.html#task_B1A4EB16E08D4266A6987F5057A9C8B7

This is incorrect:

'The username and password appears as default in the login screen. The users cannot change these credentials. '

Refer to this document, which is correct:

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g.html#pgfId-71929

Step 5 Log in to the universal AP, using admin credentials. The default factory shipped User name is 'Cisco' and Password is 'Cisco', and are case sensitive.

Conditions:
universal AP priming documentation

Workaround:
refer to correct documentation

Cisco release AirProvision

joeczebotar — Fri, 13 Nov 2015 16:26:07 GMT

Cisco release AirProvision version 1.4 this morning. Using this new version, I was successfully able to prime the APs.

Main difference in this new version, no CCO credentials required and added code support.