topic Ok, great! I didn't knew that in Wireless

Can't add CISCO MSE 10.2 to CISCO Prime

guzmanmonne — Mon, 05 Jul 2021 11:07:53 GMT

I have installed a CISCO PI 3.0 on our facilities to maintain the configurations of our CISCO devices and to control two wireless controllers.

The discovery process worked correctly and I was able to add both controllers to the CISCO PI.

When I tried to add my CISCO MSE to the PI I hit a wall. I tried to look around for a solution but none work. When I try to add the MSE, I fill the inputs and then an error shows saying:

"No response from Server. It may be unreachable, or server is down or HTTPS connection to server failed."

I can't make anything from this since from the PI I can ping them and the MSE is up and working.

Does anybody knows what the problem is?

There is no integration

Rasika Nayanajith — Thu, 22 Oct 2015 02:37:06 GMT

There is no integration between PI & CMX 10.x. So you do not want to do this.

Only thing you want to do is give PI credential when setting up CMX while synchronize maps & controller information onto CMX.

HTH

Rasika

*** Pls rate all useful responses ***

Ok, great! I didn't knew that

guzmanmonne — Thu, 22 Oct 2015 17:15:09 GMT

Ok, great!

I didn't knew that.

Thank you.

Re: There is no integration

priorlee1 — Thu, 09 Nov 2017 20:51:31 GMT

any suggestions on doing this procedure?

Re: There is no integration

patoberli — Fri, 10 Nov 2017 10:20:24 GMT

Please open a new thread with more details about your used products and what you try to achieve.

Re: There is no integration

amitdongre06 — Sat, 02 Dec 2017 18:34:17 GMT

Sir I have also recieved same error. Could you please explain the resolution in more details.

Thank you

Re: Can't add CISCO MSE 10.2 to CISCO Prime

Jun Zhou — Fri, 10 Aug 2018 10:16:32 GMT

Now you can do it with PI3.2 abover and CMX10.3 abover.