topic No, this instruction is for in Wireless

Cisco Prime 2.1 HA and NFS backup

Gunter — Mon, 05 Jul 2021 09:42:43 GMT

Hi,

I've just configured my Cisco Prime with the external NFS backup server using instruction from the Administration Guide,

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/administrator/guide/PIAdminBook/backup_restore.html#pgfId-1085464

all works fine but I'm wondering what about HA server? Should I configure all the same steps I did on a primary server?

Regards

Gunter

This configuration guide is

Abhishek Abhishek — Wed, 25 Mar 2015 10:16:28 GMT

This configuration guide is for backup server only. You need to check another configuration guide for the primary server as their configurations are different.

No, this instruction is for

Gunter — Fri, 03 Apr 2015 07:08:32 GMT

No, this instruction is for how to configure backup server and how to configure Cisco Prime to be able to use NFS for backup files. It works, I did this and there was no problem during the configuration. The only thing I'm wondering is that I did this on the primary Cisco Prime and not on the HA CP server. So what will hempen if the primary fail and the HA switch over as a primary? Should I configure the same repository on it, should I enable NFS on the HA server also?