topic Controller software compatibility with cisco prime 2.0 in Wireless

Controller software compatibility with cisco prime 2.0

Mark Elsen — Mon, 05 Jul 2021 06:57:32 GMT

Are any of the following wireless software (5500 controller) releases compatibile with cisco prime 2.0 ?

- 7.4.121.0

- 7.6.100.0

Controller software compatibility with cisco prime 2.0

Sandeep Choudhary — Tue, 14 Jan 2014 12:14:58 GMT

HI,

Cisco PI 2.0 supports:

Cisco 5500 Series

7.0 through 7.4.110.0

http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/release/notes/cpi_rn.html

Your both software not supported by PI 2.0.

May be PI 2.1 will support both these software in future.

Regards

Controller software compatibility with cisco prime 2.0

Stephen Rodriguez — Tue, 14 Jan 2014 12:15:59 GMT

For 7.4 and 7.6 support, you want to run PI 1.4

http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.4/release/notes/cpi_rn_141.html#wp87151

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Re: Controller software compatibility with cisco prime 2.0

Scott Fella — Tue, 14 Jan 2014 12:16:00 GMT

They will work. The v7.4 is compatible, but v7.6 is fully supported in PI 1.4.1 and PI 2.1 which is not out. I have PI 2.0 and WLC v7.6, but Cisco doesn't support v7.6 unless you use PI 1.4.1 or wait for PI 2.1.

Sent from Cisco Technical Support iPhone App

Controller software compatibility with cisco prime 2.0

Mark Elsen — Tue, 14 Jan 2014 12:30:36 GMT

Tx, but narrowing the discussion to using compatible releases (ONLY) between prime and 5500 controller sw it seems that I am stuck upto 7.4.100.0 for the moment. Thanks to all who responded and/or provided usefull links.

Re: Controller software compatibility with cisco prime 2.0

Scott Fella — Tue, 14 Jan 2014 13:40:17 GMT

PI 2.0 can work with WLC v7.6 as I have that running. The 3700's are only supported in PI 1.4.1 and PI 2.1.

Sent from Cisco Technical Support iPhone App

Controller software compatibility with cisco prime 2.0

Mark Elsen — Tue, 14 Jan 2014 14:25:38 GMT

Hmm, define 'can work' and 'have running' ; it is not because we see some good looking menu's that things 'work';

anyway it contradicts cisco's viewpoint on these matters.

Re: Controller software compatibility with cisco prime 2.0

Scott Fella — Tue, 14 Jan 2014 14:45:51 GMT

Well if you have been around there for a while, then you know that these are not 100%. So does PI work well with v7.6, for me it does. Look at Leo who is also on the forum. He has WCS still managing WLC v7.5. You should test it for yourself. Bring up PI 2.0 and PI 1.4.x. You can rehost the license and run them in parallel.

Sent from Cisco Technical Support iPhone App

Re: Controller software compatibility with cisco prime 2.0

Scott Fella — Tue, 14 Jan 2014 14:50:58 GMT

PI 1.4.1 supports both code

http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.4/release/notes/cpi_rn_141.html#wp86690

Sent from Cisco Technical Support iPhone App