topic Re: PRIME INFRASTRUCTURE 1.2 STARTUP ISSUES in Wireless

PRIME INFRASTRUCTURE 1.2 STARTUP ISSUES

Neville Price — Sun, 04 Jul 2021 06:53:44 GMT

I have had to do a second restore in 2 months from backup of the entire system, on this occasion NCS is not starting fully,

Health Monitor Server is starting.

Reporting Server is Starting

Ftp Server is running

Database server is running

Tftp Server is running

Matlab Server is running

NMS Server is stopped.

SAM Daemon is running ...

DA Daemon is running ...

Syslog Daemon is running ...

This is getting very frustrating, has anyone experienced this issue?

I did an ncs db reinitdb, restored the system from a recent backup......

Re: PRIME INFRASTRUCTURE 1.2 STARTUP ISSUES

Scott Fella — Thu, 11 Apr 2013 10:53:10 GMT

I have had that issue in my lab, but really don't know why. It might be due to the resources that was allocated to my VM and maybe changing it and then rebooting the server which then I could never get to startup again. I have just learned to take a snapshot and revert back to a good snapshot if I run into the issue again.

Sent from Cisco Technical Support iPhone App

Re: PRIME INFRASTRUCTURE 1.2 STARTUP ISSUES

Neville Price — Thu, 11 Apr 2013 10:58:45 GMT

Prime 1.2 is installed on an appliance in my case, all we were doing when the system crashed, was a switch discovery. Have you upgraded to 1.3, if so did you go to 1.2.1.12 before 1.3

Re: PRIME INFRASTRUCTURE 1.2 STARTUP ISSUES

Scott Fella — Thu, 11 Apr 2013 11:02:44 GMT

I have upgraded to PI 1.3. Just make sure you look at this

https://supportforums.cisco.com/docs/DOC-26972

Sent from Cisco Technical Support iPhone App

Re: PRIME INFRASTRUCTURE 1.2 STARTUP ISSUES

Scott Fella — Thu, 11 Apr 2013 11:05:55 GMT

Also make sure you install the point patch which allows the existing PI 1.2 to be upgraded. See the link below

http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/quickstart/guide/cpi_qsg_1_3.html#wp69624

Sent from Cisco Technical Support iPhone App

Re: PRIME INFRASTRUCTURE 1.2 STARTUP ISSUES

Neville Price — Thu, 11 Apr 2013 11:19:39 GMT

Thanks Scott, I will get onto this right away.

Sent from Cisco Technical Support iPhone App

Re: PRIME INFRASTRUCTURE 1.2 STARTUP ISSUES

Scott Fella — Thu, 11 Apr 2013 11:27:05 GMT

It might be an issues with PI 1.2. I really haven't had any issues with PI 1.3 yet. I have upgraded on of my clients appliance from 1.2 to PI 1.3 and that went pretty smooth.

Sent from Cisco Technical Support iPhone App

PRIME INFRASTRUCTURE 1.2 STARTUP ISSUES

TaylorW47 — Thu, 11 Apr 2013 18:50:06 GMT

Had the same issue, I was running the 1.2 small OVA, about 100 aps and 2 5508s - TAC recommended blowing it away and using the 1.3 medium OVA - everything seems to be working great now.