https://community.cisco.com/t5/wireless/mobility-anchor-doubts/m-p/3084126#M35771 <P>Hi All,</P> <P></P> <P>Have a doubt in regards to the multiple Mobility Anchor for a single guest SSID</P> <OL> <LI>We have a guest SSID created in our remote site WLC</LI> <LI>Have established mobility tunnels between our 2 anchors at DC and DR</LI> <LI>Is it possible to add and make both the mobility anchors in active-standby state?</LI> <LI>When i tried to all the DR mobility anchor to the guest SSID it failed over to the DR anchor though the DC mobility acnhor was u and reachable.</LI> </OL> <P>I wanted to confirm whether it is possible to have 2 mobility anchors for 1 SSID in active-standaby mode?</P> <P></P> <P>Inputs are highly appreciated.</P> Mon, 05 Jul 2021 14:20:08 GMT Karthikrm 2021-07-05T14:20:08Z https://community.cisco.com/t5/wireless/mobility-anchor-doubts/m-p/3084126#M35771 <P>Hi All,</P> <P></P> <P>Have a doubt in regards to the multiple Mobility Anchor for a single guest SSID</P> <OL> <LI>We have a guest SSID created in our remote site WLC</LI> <LI>Have established mobility tunnels between our 2 anchors at DC and DR</LI> <LI>Is it possible to add and make both the mobility anchors in active-standby state?</LI> <LI>When i tried to all the DR mobility anchor to the guest SSID it failed over to the DR anchor though the DC mobility acnhor was u and reachable.</LI> </OL> <P>I wanted to confirm whether it is possible to have 2 mobility anchors for 1 SSID in active-standaby mode?</P> <P></P> <P>Inputs are highly appreciated.</P> Mon, 05 Jul 2021 14:20:08 GMT https://community.cisco.com/t5/wireless/mobility-anchor-doubts/m-p/3084126#M35771 Karthikrm 2021-07-05T14:20:08Z