https://community.cisco.com/t5/wireless/anchor-mobility-with-sso/m-p/3006795#M35833 <P dir="ltr">8.2.141 on all 4 of them</P> Thu, 27 Apr 2017 11:20:02 GMT snir_orlanczyk 2017-04-27T11:20:02Z https://community.cisco.com/t5/wireless/anchor-mobility-with-sso/m-p/3006793#M35831 <P>Hi,</P> <P></P> <P>i have a setup of 4 8540 WLCs , their are devided into 2 pairs in SSO HA , one is locate in the LAN and the other one is in the DMZ.</P> <P>the DMZ pair is set as the Anchor controller.</P> <P></P> <P>we did switchover test today, and when we did a failover in the LAN env everything worked fine, we didnt have any drop.</P> <P>but when we did the failover in the DMZ env the mobilty link between them failed and the mobilty staet was and control path down and did not recover until i rebooted both controllers in the DMZ env .</P> <P></P> <P>anyone have an idea what can cause it ?</P> <P></P> <P>thank you</P> Mon, 05 Jul 2021 13:56:38 GMT https://community.cisco.com/t5/wireless/anchor-mobility-with-sso/m-p/3006793#M35831 snir_orlanczyk 2021-07-05T13:56:38Z https://community.cisco.com/t5/wireless/anchor-mobility-with-sso/m-p/3006794#M35832 <P>What version of code are you running ?</P> Thu, 27 Apr 2017 09:40:33 GMT https://community.cisco.com/t5/wireless/anchor-mobility-with-sso/m-p/3006794#M35832 M. Wisely 2017-04-27T09:40:33Z https://community.cisco.com/t5/wireless/anchor-mobility-with-sso/m-p/3006795#M35833 <P dir="ltr">8.2.141 on all 4 of them</P> Thu, 27 Apr 2017 11:20:02 GMT https://community.cisco.com/t5/wireless/anchor-mobility-with-sso/m-p/3006795#M35833 snir_orlanczyk 2017-04-27T11:20:02Z