topic Hi farhan, in Wireless

Mobility Express

khairul.farhan — Mon, 05 Jul 2021 13:23:56 GMT

Hello,

recently got 1852i wireless access points. The AP being configured as WLC, is it any way to hide the SSID once we create it? since there are no option to hide it?

Hi farhan,

Sandeep Choudhary — Thu, 19 Jan 2017 09:48:02 GMT

Hi farhan,

I am not sure if GUI option is available for it or not but you can do it via CLI:

From the CLI is the following command available:

config wlan broadcast-ssid disable <wlan id> where wlan id is the number of your wlan. If unsure of that, do a show wlan summary which should give you that info.

Regards

Dont forget to rate helpful posts

Hi Sandeep,

khairul.farhan — Thu, 19 Jan 2017 09:52:05 GMT

Hi Sandeep,

If i do "config wlan broadcast-ssid disable <wlan id>" it will stop the broadcast ssid. Just want to hide it only.

it will just hide the ssid.

Sandeep Choudhary — Thu, 19 Jan 2017 10:34:41 GMT

it will just hide the ssid.

Regards

Dont forget to rate helpful posts

Hi Sandeep,

khairul.farhan — Thu, 26 Jan 2017 02:55:31 GMT

Hi Sandeep,

When i issue the command, SSID disable and i cannot connect to the WLAN. It just disable it instead hide.

paste the output of this

Sandeep Choudhary — Thu, 26 Jan 2017 06:33:30 GMT

paste the output of this command:

sh wlan summary

Regards

it just show 2 wlan only. can

khairul.farhan — Fri, 03 Feb 2017 09:13:28 GMT

it just show 2 wlan only. can find the attachment.

Thanks

Bro,

Sandeep Choudhary — Fri, 03 Feb 2017 09:30:14 GMT

Bro,

It will disable the ssid.

paste the output of above command: sh wlan <1 or 2>

Regards

ok, it shows it disable the

khairul.farhan — Fri, 03 Feb 2017 10:01:50 GMT

ok, it shows it disable the ssid.

see the output of the command

Sandeep Choudhary — Fri, 03 Feb 2017 10:19:46 GMT

see the output of the command:

Status is enabled

and Broadcast SSID is disabled..

Thats correct!!!!!!!

Regards

Dont forget to rate all helpful posts