topic WLSE Express with IOS AP's error message in Wireless https://community.cisco.com/t5/wireless/wlse-express-with-ios-ap-s-error-message/m-p/894483#M3598 <P>Packet to client 0016.e3bc.7b2d reached max retries, removing the client</P><P></P><P>Can i get some help understandig this message and if it is an issue?</P> Sat, 03 Jul 2021 22:25:55 GMT ptilling 2021-07-03T22:25:55Z WLSE Express with IOS AP's error message https://community.cisco.com/t5/wireless/wlse-express-with-ios-ap-s-error-message/m-p/894483#M3598 <P>Packet to client 0016.e3bc.7b2d reached max retries, removing the client</P><P></P><P>Can i get some help understandig this message and if it is an issue?</P> Sat, 03 Jul 2021 22:25:55 GMT https://community.cisco.com/t5/wireless/wlse-express-with-ios-ap-s-error-message/m-p/894483#M3598 ptilling 2021-07-03T22:25:55Z Re: WLSE Express with IOS AP's error message https://community.cisco.com/t5/wireless/wlse-express-with-ios-ap-s-error-message/m-p/894484#M3599 <HTML><HEAD></HEAD><BODY><P>This error message indicates that the Access Point (AP) attempts to poll the client a certain number of times, but does not receive a response. Therefore, the client is removed from the association table. This issue is commonly seen when the client and AP are attempting to communicate in a noisy Radio Frequency (RF) environment. Try changong the channel number and check if it works.</P></BODY></HTML> Tue, 26 Feb 2008 23:03:30 GMT https://community.cisco.com/t5/wireless/wlse-express-with-ios-ap-s-error-message/m-p/894484#M3599 irisrios 2008-02-26T23:03:30Z