topic thank San in Wireless

CISCO AP 1602i: some PCs can't view SSID, mobile can connect

lqnghia80 — Mon, 05 Jul 2021 12:16:33 GMT

I have a CISCO AP 1

some PCs can't view SSID, mobile can connect

help me fix this problem, pls

tks

Can you paste the complete

Sandeep Choudhary — Wed, 22 Jun 2016 06:58:28 GMT

Can you paste the complete conifg of AP.

Regards

Dont forget to rate helpful posts

hi Sandeep

lqnghia80 — Wed, 22 Jun 2016 07:08:18 GMT

hi Sandeep

this is my AP config

Current configuration : 1901 bytes

! Last configuration change at 00:42:12 UTC Mon Mar 1 1993

version 15.2

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

hostname Tang_5.1

logging rate-limit console 9

enable secret 5 $1$sndk$SgK1Os.g0.yFs08KDvqDo.

no aaa new-model

no ip routing

no ip cef

dot11 syslog

dot11 ssid Tang_5.1

authentication open

guest-mode

crypto pki token default removal timeout 0

username Cisco password 7 02250D480809

username admin privilege 15 password 7 1218011A1B055D5679

bridge irb

interface Dot11Radio0

no ip address

no ip route-cache

encryption key 1 size 40bit 7 0E63803F2135 transmit-key

encryption mode wep mandatory

ssid Tang_5.1

antenna gain 0

stbc

beamform ofdm

station-role root

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 spanning-disabled

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

interface Dot11Radio1

no ip address

no ip route-cache

shutdown

antenna gain 0

no dfs band block

channel dfs

station-role root

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 spanning-disabled

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

interface GigabitEthernet0

no ip address

no ip route-cache

duplex auto

speed auto

bridge-group 1

bridge-group 1 spanning-disabled

no bridge-group 1 source-learning

interface BVI1

ip address 192.168.10.245 255.255.255.0

no ip route-cache

ip default-gateway 192.168.10.1

ip forward-protocol nd

ip http server

no ip http secure-server

ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

snmp-server community defaultCommunity RW

bridge 1 route ip

line con 0

line vty 0 4

transport input all

end

Can you test without any key

Sandeep Choudhary — Wed, 22 Jun 2016 07:16:37 GMT

Can you test without any key(Without wep) mean just leave ssid open for all and test it again.

Regards

Dont forget to rate helpful posts

thank Sandeep I'll try

lqnghia80 — Wed, 22 Jun 2016 07:22:45 GMT

thank Sandeep

I'll try

I would recommend to use WPA

Sandeep Choudhary — Wed, 22 Jun 2016 08:01:01 GMT

I would recommend to use WPA or WPA2 for a SSID. Its more secure.

Regards

Dont forget to rate helpful posts

thank San

lqnghia80 — Wed, 22 Jun 2016 08:28:52 GMT

thank San

this problem has resolved

thank all again!

If its resolved then please

Sandeep Choudhary — Wed, 22 Jun 2016 08:34:16 GMT

If its resolved then please mark this question as answered, it may help others.

Regards

Dont forget to rate helpful posts