WLC-4402 is rebooted after changing the mobility group name

manishsr1 — Mon, 05 Jul 2021 10:30:31 GMT

WLC-4402(Code- 7.0.235) is rebooted after changing the mobility group name. Whenever i am changing the mobility group name its rebooting.

It should not.

Rasika Nayanajith — Mon, 06 Jul 2015 00:01:05 GMT

It should not.

I do not have exact code to test, but in 7.0.116.0 I can change the mobility group name without any reboot.

(WLC2) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.116.0
.
.

(WLC2) >show mobility summary 
Symmetric Mobility Tunneling (current) .......... Enabled
Symmetric Mobility Tunneling (after reboot) ..... Enabled
Mobility Protocol Port........................... 16666
Default Mobility Domain.......................... DMZ
.
.
WLC2) >config mobility group domain DMZ1 

(WLC2) >show mobility summary             
Symmetric Mobility Tunneling (current) .......... Enabled
Symmetric Mobility Tunneling (after reboot) ..... Enabled
Mobility Protocol Port........................... 16666
Default Mobility Domain.......................... DMZ1

HTH

Rasika

*** Pls rate all useful responses ***

topic WLC-4402 is rebooted after changing the mobility group name in Wireless

WLC-4402 is rebooted after changing the mobility group name

It should not.