topic 7.6.120.0 is not that good, in Wireless

Mobility Group Control & Data Paths are down

Saravanan E — Mon, 05 Jul 2021 09:02:02 GMT

Hi All,

Today i am facing issue with mobility group. i checked and found control and data path is down on foreign controller.I am able to ping anchor controller. Required ports are open on firewall but mping and eping fails. Any idea whats wrong. On Anchor controller, i have 6 foreign controller configured and among these 1 alone not working. Previously all are working fine and there is no changes made on network or firewall end today.

WLC Version details Forign Controller :- 7.6.120.0

WLC Anchor Controller :- 7.6.120.0

I assume the anchor status is

George Stefanick — Fri, 28 Nov 2014 13:52:12 GMT

I assume the anchor status is down on both controllers ?

If if the MAC addresses and IP address are correct and fw rules are good then I would do a few things ..

Reboot controller

open fw with no resections

thats what hat I would do ..

7.6.120.0 is not that good,

Rasika Nayanajith — Fri, 28 Nov 2014 19:52:17 GMT

7.6.120.0 is not that good, go for 7.6.130.0 which is the recommended code in 7.6 train.

HTH

Rasika

**** Pls rate all useful responses ****