topic Mobility Service Engine in Wireless

Mobility Service Engine

Elie Sbat — Sun, 04 Jul 2021 02:37:28 GMT

Guys

I am configuring WCS version 7.0.164.3 with a base license of 100 AP. Also, I have a mobility Service Engine MSE which I need to import to WCS.

I am not able to find the mobility tab to enter the management ip address of the MSE and synchronize the information with WCS

WHY?

is it a WCS version problem? or is it a base license problem?

Any Idea?

Many Thanks,

Elie Sbat

Re: Mobility Service Engine

Federico Ziliotto — Wed, 05 Jan 2011 11:59:59 GMT

Hi Elie,

To add an MSE in WCS we should usually browse under

Services > Mobility Services

and then select "Add Mobility Services Engine" from the drop-down menu.

If you have a WCS BASE license (not PLUS), adding the MSE might fail.

Hope this helps,

Fede

If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Re: Mobility Service Engine

Elie Sbat — Wed, 05 Jan 2011 12:25:42 GMT

Federico

The services I cannot find it in the WCS software version I am using. It could be because I am using a base license?

Thanks,

Elie

Re: Mobility Service Engine

Federico Ziliotto — Wed, 05 Jan 2011 13:00:30 GMT

Hi Elie,

Even with the BASE license, you should still be able to see the menu.
Attached you can find a quick test from my lab, with a completely unlicensed WCS 7.0.164.3.

Did you test with different browsers for example?

Regards,

Fede

--
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Re: Mobility Service Engine

sschmidt — Thu, 06 Jan 2011 15:42:31 GMT

On initial install ( unlicensed ) you will see Services > Mobility Services.

If you then install a Base license Services > Mobility Services will not be visible. If you then install a Plus upgrade license for the base license Services > Mobility Services will reappear. All of these changes occur without a restart of WCS as licenses are added.

What you are seeing is due to the Base license being installed.

Re: Mobility Service Engine

Elie Sbat — Sat, 08 Jan 2011 05:32:18 GMT

When I started working on the WCS software it was license with a Base license, and I cannot see the Mobility Service Tab in the software.

I just want to know if it is a license issue from this the Tab disappeared or do I need to install another version of the software?

Thanks,

Elie