Mobility Issues with Guest VLAN

sean.curry — Sat, 03 Jul 2021 23:29:57 GMT

I have two sites, one in England, one in Houston. The site in England has a 4404

(10.160.104.187), running against an anchor controller in Houston (10.32.210.251), that

provides internet access for guest users, running 4.2.112.0. Up until the last few days,

it worked without issue. Now, the control channel will not come up, although the data

channel is fine.

From the Houston 4404:

(uscy1wc-air011) >mping 10.160.104.187

Send count=3, Receive count=0 from 10.160.104.187

(uscy1wc-air011) >show msglog

Message Log Severity Level ...................... VERBOSE

00:0b:7d:0f:38:75 Ignoring Announce, client record for

not found

Wed Sep 17 15:54:57 2008: Mobility packet received from:

Wed Sep 17 15:54:57 2008: 10.160.104.185, port 16666

Wed Sep 17 15:54:57 2008: type: 3(MobileAnnounce) subtype: 0 version: 1 xid

: 13224 seq: 17332 len 116 flags 0

Wed Sep 17 15:54:57 2008: group id: aa7a4fec 6bf5225c d25d6e98 b17ac701

Wed Sep 17 15:54:57 2008: mobile MAC: 00:0b:7d:0f:38:75, IP: 0.0.0.0, instance

: 0

Wed Sep 17 15:54:57 2008: VLAN IP: 10.160.191.242, netmask: 255.255.255.0

Wed Sep 17 15:54:57 2008: Switch IP: 10.160.104.185

Wed Sep 17 15:54:57 2008: 00:0b:7d:0f:38:75 Ignoring Announce, client record for

not found

(uscy1wc-air011) show>mobility sum

Symmetric Mobility Tunneling (current) .......... Enabled

Symmetric Mobility Tunneling (after reboot) ..... Enabled

Mobility Protocol Port........................... 16666

Mobility Security Mode........................... Disabled

Default Mobility Domain.......................... BG

Mobility Keepalive interval...................... 10

Mobility Keepalive count......................... 3

Mobility Group members configured................ 3

Controllers configured in the Mobility Group

MAC Address IP Address Group Name Status

00:18:ba:49:ab:40 10.160.104.187 BG Control Path Down

00:1c:58:8a:b4:a0 10.160.104.185 BG Control Path Down

00:1e:be:7a:b8:c0 10.32.210.251 BG Up

(uscy1wc-air011) show>mobility stat

Global Mobility Statistics

Rx Errors .................................... 0

Tx Errors .................................... 0

Responses Retransmitted ...................... 0

Handoff Requests Received .................... 388

Handoff End Requests Received ................ 0

State Transitions Disallowed.................. 0

Resource Unavailable.......................... 0

Mobility Initiator Statistics

Handoff Requests Sent ........................ 0

Handoff Replies Received ..................... 0

Handoff as Local Received .................... 0

Handoff as Foreign Received .................. 0

Handoff Denys Received ....................... 0

Anchor Request Sent .......................... 0

Anchor Deny Received ......................... 0

Anchor Grant Received ........................ 0

Anchor Transfer Received ..................... 0

Mobility Responder Statistics

Handoff Requests Ignored ..................... 388

Ping Pong Handoff Requests Dropped ........... 0

--More-- or (q)uit

Handoff Requests Dropped ..................... 0

Handoff Requests Denied ...................... 0

Client Handoff as Local ...................... 0

Client Handoff as Foreign ................... 0

Client Handoff Inter-Group .................. 0

Anchor Requests Received ..................... 0

Anchor Requests Denied ....................... 0

Anchor Requests Granted ...................... 0

Anchor Transferred ........................... 0

(uscy1wc-air011) show>

Given what I see, I think that the anchor control is rejecting the requests for some

reason.

Re: Mobility Issues with Guest VLAN

wynneit — Wed, 17 Sep 2008 21:08:43 GMT

LWAPP control is port 12222 and control is 12223. WOrth having a check that nothing has changed and comms is ok over these 2 ports

Re: Mobility Issues with Guest VLAN

sean.curry — Wed, 17 Sep 2008 21:09:57 GMT

Thanks, I'll give that a shot.

Re: Mobility Issues with Guest VLAN

sean.curry — Wed, 17 Sep 2008 21:48:35 GMT

I ended up removig the mobility configuration, and re-doing it. The only difference this time was I used the edit all function instead of the single entry at a time option, and everything came up without an issue. Probably just me.

Re: Mobility Issues with Guest VLAN

wynneit — Wed, 17 Sep 2008 21:54:30 GMT

WIreless can best be desribed as feature rich!! You have to smile and be polite to the WLC to work, its probably the WLC having a bad day lol

topic Re: Mobility Issues with Guest VLAN in Wireless

Mobility Issues with Guest VLAN

Re: Mobility Issues with Guest VLAN

Re: Mobility Issues with Guest VLAN

Re: Mobility Issues with Guest VLAN

Re: Mobility Issues with Guest VLAN