Mobility Group

ricardorojas123 — Sat, 03 Jul 2021 21:36:37 GMT

How man wirelesslancontrollers are permited configure into the same mobility group?

Re: Mobility Group

d-berlinski — Wed, 12 Sep 2007 09:05:25 GMT

I believe it is limited to 24.

Re: Mobility Group

larrywoods — Thu, 20 Sep 2007 17:44:46 GMT

It is 24. If you are using WiSMs, these are technically 2 controllers. Magic number 24.

Re: Mobility Group

Rob Huffman — Fri, 21 Sep 2007 12:29:10 GMT

Hi Ricardo,

Just to add a clip to the good info from David and Larry (5 points to both of you!);

A mobility group can include up to 24 controllers of any type. The number of access points supported in a mobility group is bound by the number of controllers and controller types in the group.

Examples:

1. A 4404-100 controller supports up to 100 access points. Therefore, a mobility group consisting of 24 4404-100 controllers supports up to 2400 access points (24 * 100 = 2400 access points).

2. A 4402-25 controller supports up to 25 access points, and a 4402-50 controller supports up to 50 access points. Therefore, a mobility group consisting of 12 4402-25 controllers and 12 4402-50 controllers supports up to 900 access points (12 * 25 + 12 * 50 = 300 + 600 = 900 access points).

From this good doc;

http://www.cisco.com/en/US/docs/wireless/controller/4.0/configuration/guide/c40mobil.html

Hope this helps!

Rob

topic Mobility Group in Wireless

Mobility Group

Re: Mobility Group

Re: Mobility Group

Re: Mobility Group