WLC Down

arevalojuly — Mon, 05 Jul 2021 14:06:58 GMT

Hello,

Hoping that someone already encountered this issue and have your guidance.

We recently upgraded our Cisco 5508 WLC. But after upgrade we are able to reach the management address for a few minutes but wlc went down after.

We are able to get console access to the device. All of configuration are intact and also notice that my AP can still associate to it. even though AP are associated Wireless are still not working. Hoping for your guidance

software is form 8.0.133.0 to 8.0.140.0

Regards,

July

Post the complete output to

Leo Laohoo — Fri, 26 May 2017 03:16:06 GMT

Post the complete output to the following commands:

1. sh sysinfo; and

2. sh coredump summary

Hi Leo Please see out put

arevalojuly — Fri, 26 May 2017 06:05:52 GMT

Hi Leo Please see out put

Show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.2.141.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 7.0.112.21
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS

System Name...................................... cntjwc01
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. Disabled
IP Address....................................... 146.40.145.197
IPv6 Address..................................... ::
Last Reset....................................... Software reset
System Up Time................................... 0 days 18 hrs 13 mins 18 secs
System Timezone Location......................... (GMT +8:00) HongKong, Bejing, Chongquing
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180

Configured Country............................... Multiple Countries : SG,US

--More-- or (q)uit
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +35 C
External Temperature............................. +20 C
Fan Status....................................... OK

State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 3
Number of Active Clients......................... 0

Burned-in MAC Address............................ C4:64:13:8F:2D:E0
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 500
System Nas-Id....................................
WLC MIC Certificate Types........................ SHA1

show coredump summary

Core Dump upload is disabled

Core Dump file on flash:

SW Version....................................... 8.0.133.0
Time Stamp....................................... Wed Jan 25 16:23:31 2017
File Size........................................ 19419558
File Name Suffix................................. _8.0.133.0_cntjwc01_1485332611.gz

Data Path Core Dump file on flash:

SW Version....................................... N/A
Time Stamp....................................... Wed Jan 25 16:23:31 2017
File Size........................................ 19419558
File Name Suffix................................. NoInfo_1485332611.gz

Go to Management > Tech

Leo Laohoo — Fri, 26 May 2017 06:45:18 GMT

Go to Management > Tech Support > Controller Crash.

If there is something there, copy and paste into a text file and upload to this thread.

Leo,

arevalojuly — Thu, 08 Jun 2017 03:22:21 GMT

Leo,

Thank you very much for your help. We already resolved the issue. We ended up in restoring the WLC into factory default and configure it from scratch.

Regards,

July Arevalo

topic Leo, in Wireless

WLC Down

Post the complete output to

Hi Leo Please see out put

Go to Management > Tech

Leo,