WLC name changes for no reason

williamehmke1 — Mon, 05 Jul 2021 11:06:52 GMT

I am at a loss and hopefully can get some answers on here. I have an open case with Cisco but they seem stumped as well. I have 3 WLC in my environment and for this forum i'll call them WLC1, WLC2 & WLC3. Periodically something is causing WLC3 to change it's name only (not IP) to WLC1 while WLC1 is still up and running and it causes all sorts of issues. Going in and changing the name back to WLC3 and then running a discovery on Prime restores everything. Has anyone else seen or experienced this issue before.

Prime is version 2.0 and the controller info is as follows:

System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.4.121.0
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.95.16
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS

Any help is greatly appreciated

Going in and changing the

Leo Laohoo — Mon, 19 Oct 2015 22:47:32 GMT

Going in and changing the name back to WLC3 and then running a discovery on Prime restores everything.

Just for tricks, can you please disable Prime from monitoring the WLC and see if this fixes things?

I could but we use Prime for

williamehmke1 — Tue, 03 Nov 2015 20:55:12 GMT

I could but we use Prime for managing these WLC's and because the change doesn't always happen for weeks or a month or 2 before it acts up again and i can't not have visibility into the WLC for this period of time

topic Going in and changing the in Wireless

WLC name changes for no reason

Going in and changing the

I could but we use Prime for