Virtual WLC DACL Issue

O_A_H — Mon, 05 Jul 2021 11:04:23 GMT

I'm using my virtual WLC 8.0 with ISE 1.3 to make Central Web Auth (CWA). Since the WLC is virtual, the AP is in Flex mode and accordingly any ACL needed to be forced by ISE is Flex ACL.

The problem is that whenever i try to add the FlexACL to the AP or to the FlexGroup, the WLC gives an error (Request failed: Not a Webauth/WebPassthrough enabled Local Swicthed WLAN). While the WLAN to be configured for CWA needs to be (MAC Filtering enabled + No L3 Policy).

This scenario is explained in this URL for the Flex case but it shows that he can add the ACL to the AP normally. Anything am i missing or it is kind of limitation in virtual WLC?

Central Web Authentication with FlexConnect APs on a WLC with ISE Configuration Example - Cisco

Any help?

O_A_H — Sat, 31 Oct 2015 14:17:43 GMT

Any help?

This may be a silly question

David Vaquerano — Tue, 03 Nov 2015 00:52:48 GMT

This may be a silly question but, have you enabled local-switching on the wlan? Just to make sure

Yes

O_A_H — Tue, 03 Nov 2015 14:50:11 GMT

Yes

topic Any help? in Wireless

Virtual WLC DACL Issue

Any help?

This may be a silly question

Yes