topic Cisco WLC 2504 HA deployment issue! in Wireless

Cisco WLC 2504 HA deployment issue!

bepeen — Mon, 05 Jul 2021 09:38:46 GMT

Hello,

I'm getting high latency in my WLAN after deploying 2504 controller with 2504 HA:

Since, primary secondary fail-over is working I guess the configuration should be okay.

This is the case:

While connecting only Primary controller there is no latency,

While connecting only Secondary controller there is no latency,

While connecting both controller there is a high latency,

There're no any proper deployment guides for the 2504 controllers!

Here I've attached configuration file, please take a look and suggest me the correct process.

I would highly appreciate your any advice.

While connecting both

Leo Laohoo — Wed, 04 Mar 2015 06:42:59 GMT

While connecting both controller there is a high latency,

What do you mean by this?

Fail-over between primary and

bepeen — Wed, 04 Mar 2015 07:06:48 GMT

Fail-over between primary and secondary worked but there is a high latency form end users.

Ping result from end users to default-gateway is above 1000ms while connecting both WLC, but it's normal (1-4ms) either unplugging HA or Primary controller from L3 Switch.

When using the WLC as a dhcp

Scott Fella — Wed, 04 Mar 2015 12:35:55 GMT

When using the WLC as a dhcp server, you need to make sure the dhcp scope doesn't not overlap. You need to split the address pool so that each controller hands out a different range of address. You should see issues regarding duplicate IP address on some of the clients. Fix that and things should work better.

-Scott

Please refer to the

Abhishek Abhishek — Tue, 10 Mar 2015 02:14:21 GMT

Please refer to the deployment guide-

http://www.cisco.com/c/en/us/support/docs/wireless/2500-series-wireless-controllers/113034-2500-deploy-guide-00.html

Hello, i have the same issue,

decarvalhosylvain — Thu, 12 May 2016 13:56:19 GMT

Hello, i have the same issue, what is your solution ?

Thanks in advance,

Sylvain