topic AP 2702I See MAC-Address 2 MAC is MAC-int-GI0 and MAC-int-GI1 affect AP not joint WLC in Wireless

AP 2702I See MAC-Address 2 MAC is MAC-int-GI0 and MAC-int-GI1 affect AP not joint WLC

mashimaroz — Mon, 05 Jul 2021 08:54:26 GMT

Hi everybody

I use WLC 8500 V7.6.120.0 and DHCP option 43 from DHCP Server (Window Server 2008 R2) and AP-CAP2702I-E-K9

it problem in time discovery I use MAC address is AP Trapped the box add to DHCP Server but i Show mac-address in Switch port AP plug i see MAC 2 MAC

example 7c:0e:ce:e7:0b:ac but i show MAC on Switch i see 2 MAC is 7c:0e:ce:e7:0b:ac ,7c:0e:ce:e7:0b:ad

it problem in time discovery about WLC and AP because AP not joint and i cannot console and telnet because AP not live in near

you can help me thank

Can you post the output to

Leo Laohoo — Mon, 10 Nov 2014 04:56:34 GMT

Can you post the output to the following commands:

1. WLC: sh sysinfo;

2. Switch: sh cdp neighbor

Hi Leo LaohooThank for

mashimaroz — Mon, 10 Nov 2014 05:13:23 GMT

Hi Leo Laohoo

Thank for question

i show command in attachment file thank

Can you confirm the AP has an

Leo Laohoo — Mon, 10 Nov 2014 08:33:07 GMT

Can you confirm the AP has an IP Address? If it does, can you ping the IP address?

Hi Leo I can not PING to AP

mashimaroz — Wed, 12 Nov 2014 04:35:08 GMT

Hi Leo

I can not PING to AP

AP can not recieve IP Address

i Don ' t understand AP cisco Serie 2700 is Int gi1 The Not use physical ??

AP can not recieve IP Address

Leo Laohoo — Wed, 12 Nov 2014 07:52:41 GMT

AP can not recieve IP Address

Are you saying the APs are not getting a valid IP address????

Hi, I dont think I have

Dhiresh Yadav — Wed, 12 Nov 2014 08:05:39 GMT

Hi,

I dont think I have understood your problem correctly but just remember 2700 has two ports which can be connected to the switch (not every time). I hope you have connected only Port marked as "Ethernet port" and not any other port.

Regards

Dhiresh

**Please rate helpful posts**