topic Also note that vWLC only in Wireless

Virtual WLC in LAB environment

Lajja1234 — Mon, 05 Jul 2021 08:22:48 GMT

Hi!

I have just installed a Virtual WLC at home for lab purpose. Now i want to connect one accesspoint to my wlc, but for now the WLC says "0 access points supported".

Can i somehow still use the evaluation licens and connect a accesspoint to the wlc?

/Lajja1234

Hi Lajja,You have to enable

Sandeep Choudhary — Fri, 15 Aug 2014 14:19:18 GMT

Hi Lajja,

You have to enable the evaluation license in order to allow the AP to join.

How to do it, please check here:

http://www.cisco.com/c/en/us/support/docs/wireless/virtual-wireless-controller/113677-virtual-wlan-dg-00.html

Hope it helps.

Regards

Dont forget to rate helpful posts

Also note that vWLC only

Rasika Nayanajith — Fri, 15 Aug 2014 19:03:56 GMT

Also note that vWLC only support FlexConnect mode AP. So if you have local mode AP you need to convert it to FlexConnect mode.

HTH

Rasika

**** Pls rate all useful responses ****