WLC 2112 upgrading software problem (7.0.250.0)

Rosa Ladera — Mon, 05 Jul 2021 08:07:22 GMT

Before upgrade

Model AIR-WCL2112-K9

Version 6.0.199.0

Emergency Image Version N/A

Bootloader Version 4.0.191.0

Upgrade commands

transfer download datatype code
transfer download mode ftp
transfer download serverip X.Y.Z.W
transfer download path /home/rosa/Desktop/UPGRADES/Upgrade-WLCs
transfer download filename AIR-WLC2100-K9-7-0-250-0-ER.aes
transfer download username usuario
transfer download password senha
transfer download port 21
transfer download start

Save & Reboot via web page

ransfer download datatype code
transfer download mode ftp
transfer download serverip X.Y.Z.W
transfer download path /home/rosa/Desktop/UPGRADES/Upgrade-WLCs
transfer download filename AIR-WLC2100-K9-7-0-250-0-ER.aes
transfer download username usuario
transfer download password senha
transfer download port 21
transfer download start

Save & Reboot via web page

After upgrade version was unchanged e emergency image version was upgraded

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 6.0.199.0
RTOS Version..................................... 6.0.199.0
Bootloader Version............................... 4.0.191.0
Emergency Image Version.......................... 7.0.250.0
Build Type....................................... DATA + WPS

System Name...................................... impa-wireless3
System Location.................................. DataCenter
System Contact................................... netadm@impa.br
System ObjectID.................................. 1.3.6.1.4.1.9.1.828
IP Address....................................... A.B.C.D
System Up Time................................... 0 days 0 hrs 2 mins 51 secs
System Timezone Location......................... (GMT -3:00) Buenos Aires (Agentina)

Configured Country............................... Multiple Countries:US,BR
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +57 C

State of 802.11b Network......................... Disabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 4
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 0

Burned-in MAC Address............................ 00:21:A0:FE:A7:C0

How can I upgrade de boot version ?

(Cisco Controller) >show boot
Primary Boot Image............................... 6.0.199.0 (active)
Backup Boot Image................................ 5.2.178.0

transfer download filename

Leo Laohoo — Thu, 26 Jun 2014 22:13:48 GMT

transfer download filename AIR-WLC2100-K9-7-0-250-0-ER.aes

That's because you only upgraded the bootstrap. The "ER" in the filename means it's bootstrap.

Agree to Leo :)You must

Sandeep Choudhary — Fri, 27 Jun 2014 05:37:29 GMT

Agree to Leo 🙂

You must download this software from cisco.com:

AIR-WLC2100-K9-7-0-250-0.aes

Here is the link:

http://software.cisco.com/download/release.html?mdfid=282210721&flowid=7010&softwareid=280926587&release=7.0.250.0&relind=AVAILABLE&rellifecycle=ED&reltype=latest

Regards

It worked fine.ThanksRosa

Rosa Ladera — Fri, 27 Jun 2014 21:17:36 GMT

It worked fine.

Thanks

Rosa

It worked fine.ThanksRosa

Rosa Ladera — Fri, 27 Jun 2014 21:18:01 GMT

It worked fine.

Thanks

Rosa

topic Agree to Leo :)You must in Wireless

WLC 2112 upgrading software problem (7.0.250.0)

transfer download filename

Agree to Leo :)You must

It worked fine.ThanksRosa

It worked fine.ThanksRosa