topic WLC's must have same config in Wireless

WLC's must have same config

Wireless_Guy — Mon, 05 Jul 2021 08:05:35 GMT

Hello ,

I have three WLC's - WLC1, WLC2 and WLC3. They are part of mobility groups. I need WLC-2 and WLC-3 to have the same config of WLC-1.
If I upload the WLC-1 configs on WLC-2 and WLC-3 , will it work ?

Thanks

Yes, it will work. The only

Leo Laohoo — Wed, 25 Jun 2014 21:30:27 GMT

Yes, it will work.

The only thing, technically, different among them are the IP addresses and the WLC name. Otherwise, it works. I've done this so many times already.

Thanks for the reply Leo

Wireless_Guy — Wed, 25 Jun 2014 23:59:29 GMT

Thanks for the reply Leo.
So after copying the configs I need to unplug the WLC-2 and WLC-3 , console in and from CLI need to change the management IP address.

Hi,upload the config from

Sandeep Choudhary — Thu, 26 Jun 2014 07:20:03 GMT

Hi,

upload the config from WLC1.

Make changes(Ip adderss..and dynamic interface ip...etc) in config for WLC2 and then download to WLC2 by chossing command > Download from wlc gui, and same for wlc3.

Regards