topic HI Kamran,I will suggest you in Wireless

5508 WLC HA Error

Kamran Mustafayev — Mon, 05 Jul 2021 07:53:55 GMT

Dears,

We experiencing an unusual error notification, network is works fine and synchronization between WLCs is fine too, but this error notification appears

RF failure notification ErrorType: 32 Reason :Error: Config Sync failed on Standby for the usmdb:HA_send_usmDbApfMsDelete,

please explain me this

thank you

HI Kamran,First of all,

Sandeep Choudhary — Mon, 26 May 2014 06:12:48 GMT

HI Kamran,

First of all, please tell us the version of SW on your WLC ?

May its a bug.

Either update your software to 7.4.121.0 or 7.6.120.0.

Alos check this:

https://supportforums.cisco.com/discussion/11999981/cisco-wlc-5508-ha-mode-error

Regards

Dont forget to rate helpful posts

here is sysinfo

Kamran Mustafayev — Tue, 27 May 2014 09:05:10 GMT

here is sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.4.100.0
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS + LDPE

System Name...................................... NW2-WLC01
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. AP SSO
IP Address....................................... 10.10.12.8
Last Reset....................................... Power on reset
System Up Time................................... 0 days 2 hrs 54 mins 53 secs
System Timezone Location......................... (GMT +4:00) Muscat, Abu Dhabi
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180

HI Kamran,I will suggest you

Sandeep Choudhary — Tue, 27 May 2014 09:12:38 GMT

HI Kamran,

I will suggest you to upgrade to 7.4.121.0(This is versy stable version).

http://software.cisco.com/download/release.html?mdfid=282600534&flowid=7012&softwareid=280926587&release=7.6.120.0&relind=AVAILABLE&rellifecycle=ED&reltype=latest

Regards

Dont forget to rate helpful posts