topic Re: WLC - Radius authorization read/write authority in Wireless

WLC - Radius authorization read/write authority

olgu arabaci — Mon, 05 Jul 2021 07:03:06 GMT

Hi everbody;

I connect to WLC with radius authorization, i can access read/only mode. How can i fix this. Is this problem because of WLC configuration or Radius Server configuration ??

Re: WLC - Radius authorization read/write authority

Sandeep Choudhary — Mon, 27 Jan 2014 09:33:45 GMT

Hi,

Did your usename is under read only group or read write gourp in Radius server ??

which RADIUS server do u have ??

chekc this:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080782507.shtml

http://mrncciew.com/2013/04/26/wlc-admin-access-via-tacacs/

Also check in wlc :

Management > Local Management USER and see the username and useraccess mode.

Regards

Dont forget to arte helpful posts

WLC - Radius authorization read/write authority

Scott Fella — Mon, 27 Jan 2014 16:07:41 GMT

It can be both... on the radius, look at the logs and see what shell profile you are being assigned to. You might need to disconnect the WLC from the network or the radius server briefly so that you can login using a local account that can give you read write so you can make changes. The WLC will continue to use the radius unless the radius server is not online.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"