topic wlc works by authenticator server in Wireless

wlc works by authenticator server

Augustgood — Sun, 04 Jul 2021 08:15:32 GMT

In flex-connect local switching wlc work by authenticator server, or each ap contact the authentication server ?

I would like to hear your opinion I think the wlc works by autenticator in 802.1x, all client send in tunnel capwap 802.1x message to wlc that act like proxy.

Re: wlc works by authenticator server

Scott Fella — Wed, 13 Nov 2013 17:49:16 GMT

Yes and no. If you have created a FlexConnect Group, in there you specify the radius server and the shared secret so when communication is lost between the AP and the WLC, 802.1x authentication still works. If the WLC is up and the FlexConnect AP's are joined to the WLC, then the WLC sends the request to the radius server. So depends in if the FlexConnect is connected or standalone.

http://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob73dg/ch7_HREA.html

Sent from Cisco Technical Support iPhone App

Re: wlc works by authenticator server

Abha Jha — Thu, 14 Nov 2013 19:32:21 GMT

There are different scenarios:-

1. Central Dot1X Authentication (Flex 7500 Acting as Authenticator)

2. Central Dot1X Authentication (FlexConnect APs Acting as Authenticator)

3. Local Authentication

Before the 7.0.98.0 code release, local authentication was supported only when FlexConnect is in Standalone Mode to ensure client connectivity is not affected during WAN link failure. With the 7.0.116.0 release, this feature is now supported even when FlexConnect access points are in Connected Mode.

4. Dot1X Authentication (FlexConnect APs Acting as Local-EAP Server)

Link:-

https://www.cisco.com/en/US/docs/wireless/controller/technotes/7.5/Flex_7500_DG.html