topic Re:WLC 7.5 Sleeping clients with ISE and Central WEB Auth(CWA) in Wireless

WLC 7.5 Sleeping clients with ISE and Central WEB Auth(CWA)

aksel.nielsen — Sun, 04 Jul 2021 07:57:42 GMT

Hi there,

Is it possibe to use sleeping clients when using ISE and CWA?

I was thinking of enabling layer3 auth with web auth on mac auth failure, but will that work with CWA?

Or is the only solution to use LWA?

Re:WLC 7.5 Sleeping clients with ISE and Central WEB Auth(CWA)

Jacob Snyder — Sat, 28 Sep 2013 00:17:18 GMT

I have not tried said solution, but the premise behind sleeping client is that the controller doesn't end the client session.

With CWA, once you have achieved the RUN state you should remain in the RUN state until the sleeping client timer expires.

Sent from Cisco Technical Support Android App

Re:WLC 7.5 Sleeping clients with ISE and Central WEB Auth(CWA)

aksel.nielsen — Mon, 30 Sep 2013 07:51:51 GMT

The question is, how do you enable sleeping Clients when use CWA?

CWA works without enabling layer 3 auth on the controller.

Re: Re:WLC 7.5 Sleeping clients with ISE and Central WEB Auth(CW

Simon Parlsjo — Thu, 28 Nov 2013 08:25:50 GMT

Hello,

Any updates? Is this possible with cwa?

Sent from Cisco Technical Support iPad App

Re: Re:WLC 7.5 Sleeping clients with ISE and Central WEB Auth(CW

aksel.nielsen — Thu, 28 Nov 2013 08:37:12 GMT

I asked TAC, and it is not possible to use sleeping clients with CWA.

We switched to LWA and that works.

WLC 7.5 Sleeping clients with ISE and Central WEB Auth(CWA)

Maksim Sataev — Wed, 12 Feb 2014 12:06:45 GMT

Controller-> General-> User Idle Timeout (seconds) = 50 000 sec.

And your users will be connected all this time even if they going in sleepmode

be carefull with CPU loading

what is safe number of

pietrulewiczmarek — Tue, 12 May 2015 15:38:20 GMT

what is safe number of seconds with ~500 wifi devices on vwlc? We want to use CWA for BYOD mobile devices..

Regards